The original command line syntax for "git merge", which was "git
merge <msg> HEAD <parent>...", has been deprecated for quite some
time, and "git gui" was the last in-tree user of the syntax. This
is finally fixed, so that we can move forward with the deprecation.
* rs/git-gui-use-modern-git-merge-syntax:
git-gui: stop using deprecated merge syntax
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
"git init" tried to record core.worktree in the repository's
'config' file when GIT_WORK_TREE environment variable was set and
it was different from where GIT_DIR appears as ".git" at its top,
but the logic was faulty when .git is a "gitdir:" file that points
at the real place, causing trouble in working trees that are
managed by "git worktree". This has been corrected.
* nd/init-core-worktree-in-multi-worktree-world:
init: kill git_link variable
init: do not set unnecessary core.worktree
init: kill set_git_dir_init()
init: call set_git_dir_init() from within init_db()
init: correct re-initialization from a linked worktree
"gitweb" can spawn "highlight" to show blob contents with
(programming) language-specific syntax highlighting, but only
when the language is known. "highlight" can however be told
to make the guess itself by giving it "--force" option, which
has been enabled.
"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting. The command has been taught to read the
default set of configuration variables to correct this.
In the codepath that comes up with the hostname to be used in an
e-mail when the user didn't tell us, we looked at ai_canonname
field in struct addrinfo without making sure it is not NULL first.
When "git fetch" tries to find where the history of the repository
it runs in has diverged from what the other side has, it has a
mechanism to avoid digging too deep into irrelevant side branches.
This however did not work well over the "smart-http" transport due
to a design bug, which has been fixed.
* jt/fetch-pack-in-vain-count-with-stateless:
fetch-pack: do not reset in_vain on non-novel acks
A low-level function verify_packfile() was meant to show errors
that were detected without dying itself, but under some conditions
it didn't and died instead, which has been fixed.
* jk/verify-packfile-gently:
verify_packfile: check pack validity before accessing data
When "git format-patch --stdout" output is placed as an in-body
header and it uses the RFC2822 header folding, "git am" failed to
put the header line back into a single logical line. The
underlying "git mailinfo" was taught to handle this properly.
* jt/mailinfo-fold-in-body-headers:
mailinfo: handle in-body header continuations
mailinfo: make is_scissors_line take plain char *
mailinfo: separate in-body header processing
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
Merge branch 'rt/rebase-i-broken-insn-advise' into maint
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
Merge branch 'ls/travis-homebrew-path-fix' into maint
The procedure to build Git on Mac OS X for Travis CI hardcoded the
internal directory structure we assumed HomeBrew uses, which was a
no-no. The procedure has been updated to ask HomeBrew things we
need to know to fix this.
* ls/travis-homebrew-path-fix:
travis-ci: ask homebrew for its path instead of hardcoding it
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
Merge branch 'nd/checkout-disambiguation' into maint
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
Merge branch 'mm/config-color-ui-default-to-auto' into maint
Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke. This has been
corrected.
* mm/config-color-ui-default-to-auto:
Documentation/config: default for color.* is color.ui
Merge branch 'jk/reduce-gc-aggressive-depth' into maint
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
Merge branch 'jk/rebase-i-drop-ident-check' into maint
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
Merge branch 'jt/format-patch-base-info-above-sig' into maint
"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient. The base information
has been moved above the signature line.
* jt/format-patch-base-info-above-sig:
format-patch: show base info before email signature
Merge branch 'rs/xdiff-merge-overlapping-hunks-for-W-context' into maint
"git diff -W" output needs to extend the context backward to
include the header line of the current function and also forward to
include the body of the entire current function up to the header
line of the next one. This process may have to merge to adjacent
hunks, but the code forgot to do so in some cases.
* rs/xdiff-merge-overlapping-hunks-for-W-context:
xdiff: fix merging of hunks with -W context and -u context
Merge branch 'ew/http-do-not-forget-to-call-curl-multi-remove-handle' into maint
The http transport (with curl-multi option, which is the default
these days) failed to remove curl-easy handle from a curlm session,
which led to unnecessary API failures.
* ew/http-do-not-forget-to-call-curl-multi-remove-handle:
http: always remove curl easy from curlm session on release
http: consolidate #ifdefs for curl_multi_remove_handle
http: warn on curl_multi_add_handle failures
"git log --cherry-pick" used to include merge commits as candidates
to be matched up with other commits, resulting a lot of wasted time.
The patch-id generation logic has been updated to ignore merges to
avoid the wastage.
* jk/patch-ids-no-merges:
patch-ids: refuse to compute patch-id for merge commit
patch-ids: turn off rename detection
Merge branch 'js/git-gui-commit-gpgsign' into maint
"git commit-tree" stopped reading commit.gpgsign configuration
variable that was meant for Porcelain "git commit" in Git 2.9; we
forgot to update "git gui" to look at the configuration to match
this change.
* js/git-gui-commit-gpgsign:
git-gui: respect commit.gpgsign again
* sy/git-gui-i18n-ja:
git-gui: update Japanese information
git-gui: update Japanese translation
git-gui: add Japanese language code
git-gui: apply po template to Japanese translation
git-gui: consistently use the same word for "blame" in Japanese
git-gui: consistently use the same word for "remote" in Japanese
The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config(). The output from "worktree list" ignores the abbrev
setting for this reason.
Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
The procedure to build Git on Mac OS X for Travis CI hardcoded the
internal directory structure we assumed HomeBrew uses, which was a
no-no. The procedure has been updated to ask HomeBrew things we
need to know to fix this.
* ls/travis-homebrew-path-fix:
travis-ci: ask homebrew for its path instead of hardcoding it
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
* va/i18n-more:
i18n: stash: mark messages for translation
i18n: notes-merge: mark die messages for translation
i18n: ident: mark hint for translation
i18n: i18n: diff: mark die messages for translation
i18n: connect: mark die messages for translation
i18n: commit: mark message for translation
In some projects, it is common to use "[RFC PATCH]" as the subject
prefix for a patch meant for discussion rather than application. A
new option "--rfc" was a short-hand for "--subject-prefix=RFC PATCH"
to help the participants of such projects.
* jt/format-patch-rfc:
format-patch: add "--rfc" for the common case of [RFC PATCH]
Output from "git diff" can be made easier to read by selecting
which lines are common and which lines are added/deleted
intelligently when the lines before and after the changed section
are the same. A command line option is added to help with the
experiment to find a good heuristics.
* mh/diff-indent-heuristic:
blame: honor the diff heuristic options and config
parse-options: add parse_opt_unknown_cb()
diff: improve positioning of add/delete blocks in diffs
xdl_change_compact(): introduce the concept of a change group
recs_match(): take two xrecord_t pointers as arguments
is_blank_line(): take a single xrecord_t as argument
xdl_change_compact(): only use heuristic if group can't be matched
xdl_change_compact(): fix compaction heuristic to adjust ixo
The pretty-format specifier "%C(auto)" used by the "log" family of
commands to enable coloring of the output is taught to also issue a
color-reset sequence to the output.
* rs/c-auto-resets-attributes:
pretty: let %C(auto) reset all attributes
Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke. This has been
corrected.
* mm/config-color-ui-default-to-auto:
Documentation/config: default for color.* is color.ui
* rs/cocci:
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
When opening a loose object file, we often do this sequence:
- prepare a short buffer for the object header (on stack)
- call unpack_sha1_header() and have early part of the object data
inflated, enough to fill the buffer
- parse that data in the short buffer, assuming that the first part
of the object is <typename> SP <length> NUL
Because the parsing function parse_sha1_header_extended() is not
given the number of bytes inflated into the header buffer, it you
craft a file whose early part inflates a garbage sequence without SP
or NUL, and replace a loose object with it, it will end up reading
past the end of the inflated data.
To correct this, do the following four things:
- rename unpack_sha1_header() to unpack_sha1_short_header() and
have unpack_sha1_header_to_strbuf() keep calling that as its
helper function. This will detect and report zlib errors, but is
not aware of the format of a loose object (as before).
- introduce unpack_sha1_header() that calls the same helper
function, and when zlib reports it inflated OK into the buffer,
check if the inflated data has NUL. This would ensure that
parsing function will terminate within the buffer that holds the
inflated header.
- update unpack_sha1_header_to_strbuf() to check if the resulting
buffer has NUL for the same effect.
- update parse_sha1_header_extended() to make sure that its loop to
find the SP that terminates the <typename> stops at NUL.
Essentially, this makes unpack_*() functions that are asked to
unpack a loose object header to be a bit more strict and detect an
input that cannot possibly be a valid object header, even before the
parsing function kicks in.
Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings for translation in lib/index.tcl that were seemingly
left behind by 700e560 ("git-gui: Mark forgotten strings for
translation.", 2008-09-04) which marks string in do_revert_selection
procedure.
These strings are passed to unstage_help and add_helper procedures.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with v2.5.0 git merge can handle FETCH_HEAD internally and
warns when it's called like 'git merge <message> HEAD <commit>' because
that syntax is deprecated. Use this feature in git-gui and get rid of
that warning.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Tested-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add COPY_ARRAY, a safe and convenient helper for copying arrays,
complementing ALLOC_ARRAY and REALLOC_ARRAY. Users just specify source,
destination and the number of elements; the size of an element is
inferred automatically.
It checks if the multiplication of size and element count overflows.
The inferred size is passed first to st_mult, which allows the division
there to be done at compilation time.
As a basic type safety check it makes sure the sizes of source and
destination elements are the same. That's evaluated at compilation time
as well.
COPY_ARRAY is safe to use with NULL as source pointer iff 0 elements are
to be copied. That convention is used in some cases for initializing
arrays. Raw memcpy(3) does not support it -- compilers are allowed to
assume that only valid pointers are passed to it and can optimize away
NULL checks after such a call.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "highlight" binary can, in some cases, determine the language type
by the means of file contents, for example the shebang in the first line
for some scripting languages. Make use of this autodetection for files
which syntax is not known by gitweb. In that case, pass the blob
contents to "highlight --force"; the parameter is needed to make it
always generate HTML output (which includes HTML-escaping).
Although we now run highlight on files which do not end up highlighted,
performance is virtually unaffected because when we call highlight, it
is used for escaping HTML. In the case that highlight is used, gitweb
calls sanitize() instead of esc_html(), and the latter is significantly
slower (it does more, being roughly a superset of sanitize()). Simple
benchmark comparing performance of 'blob' view of files without syntax
highlighting in gitweb before and after this change indicates ±1%
difference in request time for all file types. Benchmark was performed
on local instance on Debian, using Apache/2.4.23 web server and CGI.
Document the feature and improve syntax highlight documentation, add
test to ensure gitweb doesn't crash when language detection is used.
Signed-off-by: Ian Kelling <ian@iankelling.org> Acked-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function needs_work_tree_config() that is called from
create_default_files() is supposed to be fed the path to ".git" that
looks as if it is at the top of the working tree, and decide if that
location matches the actual worktree being used. This comparison allows
"git init" to decide if core.worktree needs to be recorded in the
working tree.
In the current code, however, we feed the return value from
get_git_dir(), which can be totally different from what the function
expects when "gitdir" file is involved. Instead of giving the path to
the ".git" at the top of the working tree, we end up feeding the actual
path that the file points at.
This original location of ".git" however is only known to init_db().
Make init_db() save it and have it passed to create_default_files() as a
new parameter, which passes the correct location down to
needs_work_tree_config() to fix this.
Noticed-by: Max Nordlund <max.nordlund@sqore.com> Helped-by: Michael J Gruber <git@drmicha.warpmail.net> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
init: correct re-initialization from a linked worktree
When 'git init' is called from a linked worktree, we treat '.git'
dir (which is $GIT_COMMON_DIR/worktrees/something) as the main
'.git' (i.e. $GIT_COMMON_DIR) and populate the whole repository skeleton
in there. It does not harm anything (*) but it is still wrong.
Since 'git init' calls set_git_dir() at preparation time, which
indirectly calls get_common_dir() and correctly detects multiple
worktree setup, all git_path_buf() calls in create_default_files() will
return correct paths in both single and multiple worktree setups. The
only thing left is copy_templates(), which targets $GIT_DIR, not
$GIT_COMMON_DIR.
Fix that with get_git_common_dir(). This function will return $GIT_DIR
in single-worktree setup, so we don't have to make a special case for
multiple-worktree here.
(*) It does in fact, thanks to another bug. More on that later.
Noticed-by: Max Nordlund <max.nordlund@sqore.com> Helped-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack: do not reset in_vain on non-novel acks
The MAX_IN_VAIN mechanism was introduced in commit f061e5f ("fetch-pack:
give up after getting too many "ack continue"", 2006-05-24) to stop ref
negotiation if a number of consecutive "have"s have been sent with no
corresponding new acks. This is to stop the client from digging too deep
in an irrelevant side branch in vain without ever finding a common
ancestor. A use case (as described in that commit) is the scenario in
which the local repository has more roots than the remote repository.
However, during a negotiation in which stateless RPCs are used,
MAX_IN_VAIN will (almost) never trigger (in the more-roots scenario
above and others) because in each new request, the client has to inform
the server of objects it already has and knows the server has (to remind
the server of the state), which the server then acks.
Make fetch-pack only consider, as new acks for the purpose of
MAX_IN_VAIN, acks for objects for which the client has never received an
ack before in this session.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call getaddrinfo() to try to convert a short hostname
into a fully-qualified one (to use it as an email domain).
If there isn't a canonical name, getaddrinfo() will
generally return either a NULL addrinfo list, or one in
which ai->ai_canonname is a copy of the original name.
However, if the result of gethostname() looks like an IP
address, then getaddrinfo() behaves differently on some
systems. On OS X, it will return a "struct addrinfo" with a
NULL ai_canonname, and we segfault feeding it to strchr().
This is hard to test reliably because it involves not only a
system where we we have to fallback to gethostname() to come
up with an ident, but also where the hostname is a number
with no dots. But I was able to replicate the bug by faking
a hostname, like:
and running "git var GIT_AUTHOR_IDENT" on an OS X system.
Before this patch it segfaults, and after we correctly
complain of the bogus "user@1.(none)" address (though this
bogus address would be suitable for non-object uses like
writing reflogs).
Reported-by: Jonas Thiel <jonas.lierschied@gmx.de> Diagnosed-by: John Keeping <john@keeping.me.uk> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a static initializer for struct checkout and use it throughout the
code base. It's shorter, avoids a memset(3) call and makes sure the
base_dir member is initialized to a valid (empty) string.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when this guide was written, cvsimport was the only
game in town. These days it is probably not the best option.
Rather than go into details, let's point people to the note
at the top of cvsimport which gives other options.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs/cvsimport: prefer cvs-fast-export to parsecvs
parsecvs maintenance was taken over by ESR, and the name
changed to cvs-fast-export as it learned to support that
output format. Let's point to cvs-fast-export, as it should
have additional bug-fixes and be more convenient to use.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: pass --progress decision to recursive submodules
When cloning with "--recursive", we'd generally expect
submodules to show progress reports if the main clone did,
too.
In older versions of git, this mostly worked out of the
box. Since we show progress by default when stderr is a tty,
and since the child clones inherit the parent stderr, then
both processes would come to the same decision by default.
If the parent clone was asked for "--quiet", we passed down
"--quiet" to the child. However, if stderr was not a tty and
the user specified "--progress", we did not propagate this
to the child.
That's a minor bug, but things got much worse when we
switched recently to submodule--helper's update_clone
command. With that change, the stderr of the child clones
are always connected to a pipe, and we never output
progress at all.
This patch teaches git-submodule and git-submodule--helper
how to pass down an explicit "--progress" flag when cloning.
The clone command then decides to propagate that flag based
on the cloning decision made earlier (which takes into
account isatty(2) of the parent process, existing --progress
or --quiet flags, etc). Since the child processes always run
without a tty on stderr, we don't have to worry about
passing an explicit "--no-progress"; it's the default for
them.
This fixes the recent loss of progress during recursive
clones. And as a bonus, it makes:
git clone --recursive --progress ... 2>&1 | cat
work by triggering progress explicitly in the children.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify_packfile: check pack validity before accessing data
The verify_packfile() does not explicitly open the packfile;
instead, it starts with a sha1 checksum over the whole pack,
and relies on use_pack() to open the packfile as a side
effect.
If the pack cannot be opened for whatever reason (either
because its header information is corrupted, or perhaps
because a simultaneous repack deleted it), then use_pack()
will die(), as it has no way to return an error. This is not
ideal, as verify_packfile() otherwise tries to gently return
an error (this lets programs like git-fsck go on to check
other packs).
Instead, let's check is_pack_valid() up front, and return an
error if it fails. This will open the pack as a side effect,
and then use_pack() will later rely on our cached
descriptor, and avoid calling die().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: ask homebrew for its path instead of hardcoding it
The TravisCI macOS build is broken because homebrew (a macOS dependency
manager) changed its internal directory structure [1]. This is a problem
because we modify the Perforce dependencies in the homebrew repository
before installing them.
Fix it by asking homebrew for its path instead of hardcoding it.
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
* va/i18n:
i18n: update-index: mark warnings for translation
i18n: show-branch: mark plural strings for translation
i18n: show-branch: mark error messages for translation
i18n: receive-pack: mark messages for translation
notes: spell first word of error messages in lowercase
i18n: notes: mark error messages for translation
i18n: merge-recursive: mark verbose message for translation
i18n: merge-recursive: mark error messages for translation
i18n: config: mark error message for translation
i18n: branch: mark option description for translation
i18n: blame: mark error messages for translation
"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient. The base information
has been moved above the signature line.
* jt/format-patch-base-info-above-sig:
format-patch: show base info before email signature
"git diff -W" output needs to extend the context backward to
include the header line of the current function and also forward to
include the body of the entire current function up to the header
line of the next one. This process may have to merge to adjacent
hunks, but the code forgot to do so in some cases.
* rs/xdiff-merge-overlapping-hunks-for-W-context:
xdiff: fix merging of hunks with -W context and -u context
There were numerous corner cases in which the configuration files
are read and used or not read at all depending on the directory a
Git command was run, leading to inconsistent behaviour. The code
to set-up repository access at the beginning of a Git process has
been updated to fix them.
* jk/setup-sequence-update:
t1007: factor out repeated setup
init: reset cached config when entering new repo
init: expand comments explaining config trickery
config: only read .git/config from configured repos
test-config: setup git directory
t1302: use "git -C"
pager: handle early config
pager: use callbacks instead of configset
pager: make pager_program a file-local static
pager: stop loading git_default_config()
pager: remove obsolete comment
diff: always try to set up the repository
diff: handle --no-index prefixes consistently
diff: skip implicit no-index check when given --no-index
patch-id: use RUN_SETUP_GENTLY
hash-object: always try to set up the git repository
The http transport (with curl-multi option, which is the default
these days) failed to remove curl-easy handle from a curlm session,
which led to unnecessary API failures.
* ew/http-do-not-forget-to-call-curl-multi-remove-handle:
http: always remove curl easy from curlm session on release
http: consolidate #ifdefs for curl_multi_remove_handle
http: warn on curl_multi_add_handle failures
Some codepaths in "git pack-objects" were not ready to use an
existing pack bitmap; now they are and as the result they have
become faster.
* ks/pack-objects-bitmap:
pack-objects: use reachability bitmap index when generating non-stdout pack
pack-objects: respect --local/--honor-pack-keep/--incremental when bitmap is in use
"git log --cherry-pick" used to include merge commits as candidates
to be matched up with other commits, resulting a lot of wasted time.
The patch-id generation logic has been updated to ignore merges to
avoid the wastage.
* jk/patch-ids-no-merges:
patch-ids: refuse to compute patch-id for merge commit
patch-ids: turn off rename detection
Recently we updated the code to manage the in-core cache that holds
objects that have recently been used to reconstitute other objects
that are stored as deltas against them, but the update used an
incorrect API function to manage the list of these objects. This
has been fixed.
* jk/delta-base-cache:
add_delta_base_cache: use list_for_each_safe