* maint:
Documentation/git-reset: Add an example of resetting selected paths
Documentation/git-reset: don't mention --mixed for selected-paths reset
Documentation/git-reset:
Documentation/git-reset: don't mention --mixed for selected-paths reset
The option is accepted, but that is the only form selected-paths
variant of the reset command takes, so there is no point mentioning it.
And while we're at it, use the dashless git call.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3368d11 (Remove unnecessary git-rm --cached reference from
status output), the status output marks the "Added but not yet
committed" section as "Changes to be committed".
Update fast-import documentation to discuss crash reports
Recent versions of fast-import will now dump information out upon
crashing, making it possible for the frontend developer to review
some state information and possibly restart the import from the
point where it crashed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finish current packfile during fast-import crash handler
If fast-import is in the middle of crashing due to a protocol error
or something like that then it can be very useful to have the mark
table and all objects up until that point be available for a new
import to resume from.
Currently we just close the active packfile, unkeep all of our
newly created packfiles (so they can be deleted), and dump the
marks table to a temporary file.
We don't attempt to update the refs/tags that the process has in
memory as much of that data can be found in the crash report and I'm
not sure it would be the right thing to do under every type of crash.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the fast-import marks table in crash reports
If fast-import was not run with --export-marks but we are crashing
the frontend application developer may still benefit from having
that information available to them. We now include the marks table
as part of the crash report if --export-marks was not supplied on
the command line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include annotated tags in fast-import crash reports
If annotated tags were created they exist in a different namespace
within the fast-import process' internal memory tables so we did
not export them in the inactive branch table. Now they are written
out after the branches, in the order that they were defined by the
frontend process.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-help--browse: improve browser support under OS X
/usr/bin/open <document> is used under OS X to open a document as if the
user had double-clicked on the file's icon (i.e. HTML files are opened
w/the user's default browser).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Acked-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
commit: discard index after setting up partial commit
filter-branch: handle filenames that need quoting
diff: Fix miscounting of --check output
hg-to-git: fix parent analysis
mailinfo: feed only one line to handle_filter() for QP input
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Add "const" qualifier to "char *excludes_file".
Add "const" qualifier to "char *editor_program".
Add "const" qualifier to "char *pager_program".
config: add 'git_config_string' to refactor string config variables.
diff.c: remove useless check for value != NULL
fast-import: check return value from unpack_entry()
Validate nicknames of remote branches to prohibit confusing ones
diff.c: replace a 'strdup' with 'xstrdup'.
diff.c: fixup garding of config parser from value=NULL
commit: discard index after setting up partial commit
There may still be some entries from the original index that
should be discarded before we show the status. In
particular, if a file was added in the index but not
included in the partial commit, it would still show up in
the status listing as staged for commit.
Ultimately the correct fix is to keep the two states in
separate index_state variables. Then we can avoid having
to reload the cache from the temporary file altogether, and
just point wt_status_print at the correct index.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command used a very old fashioned construct to extract
filenames out of diff-index and ended up corrupting the output.
We can simply use --name-only and pipe into --stdin mode of
update-index. It's been like that for the past 2 years or so
since a94d994 (update-index: work with c-quoted name).
c1795bb (Unify whitespace checking) incorrectly made the
checking function return without incrementing the line numbers
when there is no whitespace problem is found on a '+' line.
This resurrects the earlier behaviour.
Noticed and reported by Jay Soffian. The test script was stolen
from Jay's independent fix.
Fix a bug in the hg-to-git convertor introduced by commit 1bc7c13af9f936aa80893100120b542338a10bf4: when searching the changeset
parents, 'hg log' returns an extra space at the end of the line, which
confuses the .split(' ') based tokenizer:
Traceback (most recent call last):
File "hg-to-git.py", line 123, in <module>
hgchildren[mparent] += ( str(cset), )
KeyError: ''
Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailinfo: feed only one line to handle_filter() for QP input
The function is intended to be fed one logical line at a time to
inspect, but a QP encoded raw input line can have more than one
lines, just like BASE64 encoded one.
Quoting LF as =0A may be unusual but RFC2045 allows it.
The issue was noticed and fixed by Jay Soffian. JC added a test
to protect the fix from regressing later.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: add 'git_config_string' to refactor string config variables.
In many places we just check if a value from the config file is not
NULL, then we duplicate it and return 0. This patch introduces the new
'git_config_string' function to do that.
This function is also used to refactor some code in 'config.c'.
Refactoring other files is left for other patches.
Also not all the code in "config.c" is refactored, because the function
takes a "const char **" as its first parameter, but in many places a
"char *" is used instead of a "const char *". (And C does not allow
using a "char **" instead of a "const char **" without a warning.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not necessary to check if value != NULL before calling
'parse_lldiff_command' as there is already a check inside this
function.
By the way this patch also improves the existing check inside
'parse_lldiff_command' by using:
return config_error_nonbool(var);
instead of:
return error("%s: lacks value", var);
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: check return value from unpack_entry()
If the tree object we have asked for is deltafied in the packfile and
the delta did not apply correctly or was not able to be decompressed
from the packfile then we can get back NULL instead of the tree data.
This is (part of) the reason why read_sha1_file() can return NULL, so
we need to also handle it the same way.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Validate nicknames of remote branches to prohibit confusing ones
The original problem was that the parsers for configuration files were
getting confused by seeing as nicknames remotes that involved
directory-changing characters. In particular, the branches config file
for ".." was particularly mystifying on platforms that can open
directories and read odd data from them.
The validation function was written by Junio Hamano (with a typo
corrected).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: fixup garding of config parser from value=NULL
Christian Couder noticed that there still were a handcrafted error()
call that we should have converted to config_error_nonbool() where
parse_lldiff_command() parses the configuration file.
[PATCH] gitk: Heed the lines of context in merge commits
There is an edit box where the number of context lines can be chosen.
But it was only used when regular diffs were displayed, not for
merge commits. This fixes it.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Paul Mackerras <paulus@samba.org>
* maint:
config: add test cases for empty value and no value config variables.
cvsimport: have default merge regex also match beginning of commit message
git clone -s documentation: force a new paragraph for the NOTE
status: suggest "git rm --cached" to unstage for initial commit
Protect get_author_ident_from_commit() from filenames in work tree
upload-pack: Initialize the exec-path.
bisect: use verbatim commit subject in the bisect log
git-cvsimport.txt: fix '-M' description.
Revert "pack-objects: only throw away data during memory pressure"
cvsimport: have default merge regex also match beginning of commit message
The default value of @mergerx uses \W, which matches a non-word
character; this means that commit messages like "Merging FOO" are not
matched by default; using \b, which matches a word boundary, instead of
\W fixes that.
This change was suggested by Frédéric Brière through
http://bugs.debian.org/463468
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
status: suggest "git rm --cached" to unstage for initial commit
It makes no sense to suggest "git reset HEAD" since we have
no HEAD commit. This actually used to work but regressed in f26a0012.
wt_status_print_cached_header was updated to take the whole
wt_status struct rather than just the reference field.
Previously the various code paths were sometimes sending in
s->reference and sometimes sending in NULL, making the
decision on whether this was an initial commit before we
even got to this function. Now we must check the initial
flag here.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protect get_author_ident_from_commit() from filenames in work tree
We used to use "cat-file commit $commit" to extract the original
author information from existing commit, but an earlier commit 5ac2715 (Consistent message encoding while reusing log from an
existing commit) changed it to use "git show -s $commit". If
you have a file in your work tree that can be interpreted as a
valid object name (e.g. "HEAD"), this conversion will not work.
Disambiguate by marking the end of revision parameter on the
comand line with an explicit "--" to fix this.
This breakage is most visible with rebase when a file called
"HEAD" exists in the worktree.
Since git-upload-pack has to spawn git-pack-objects, it has to make sure
that the latter can be found in the PATH. Without this patch an attempt
to clone or pull via ssh from a server fails if the git tools are not in
the standard PATH on the server even though git clone or git pull were
invoked with --upload-pack=/path/to/git-upload-pack.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: use verbatim commit subject in the bisect log
Due to a typo, the commit subject was shell expanded in the bisect log.
That is, if you had some shell pattern in the commit subject, bisect
would happily put all matching file names into the log.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: Automatically spell check commit messages as the user types
git-gui: support Git Gui.app under OS X 10.5
git-gui: Update German translation.
git-gui: (i18n) Fix a bunch of still untranslated strings.
It's really not very easy to visualize the commit walker,
because - on purpose - it obvously doesn't show the
uninteresting commits!
We will soon add a "--show-all" flag to the revision walker,
which will make it show uninteresting commits too, and they'll
have a '^' in front of them.
This is to update 'gitk' to show those negative commits in gray
to futureproof it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Nico analyzed and found out that this does not really help, and
I agree with it.
By the time this gets into action and data is actively thrown
away, performance simply goes down the drain due to the data
constantly being reloaded over and over and over and over and
over and over again, to the point of virtually making no
relative progress at all. The previous behavior of enforcing
the memory limit by dynamically shrinking the window size at
least had the effect of allowing some kind of progress, even if
the end result wouldn't be optimal.
And that's the whole point behind this memory limiting feature:
allowing some progress to be made when resources are too limited
to let the repack go unbounded.
Fix 'git cvsexportcommit -w $cvsdir ...' when used with relative $GIT_DIR
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Automatically spell check commit messages as the user types
Many user friendly tools like word processors, email editors and web
browsers allow users to spell check the message they are writing
as they type it, making it easy to identify a common misspelling
of a word and correct it on the fly.
We now open a bi-directional pipe to Aspell and feed the message
text the user is editing off to the program about once every 300
milliseconds. This is frequent enough that the user sees the results
almost immediately, but is not so frequent as to cause significant
additional load on the system. If the user has modified the message
text during the last 300 milliseconds we delay until the next period,
ensuring that we avoid flooding the Aspell process with a lot of
text while the user is actively typing their message.
We wait to send the current message buffer to Aspell until the user
is at a word boundary, thus ensuring that we are not likely to ask
for misspelled word detection on a word that the user is actively
typing, as most words are misspelled when only partially typed,
even if the user has thus far typed it correctly.
Misspelled words are highlighted in red and are given an underline,
causing the word to stand out from the others in the buffer. This is
a very common user interface idiom for displaying misspelled words,
but differs from one platform to the next in slight variations.
For example the Mac OS X system prefers using a dashed red underline,
leaving the word in the original text color. Unfortunately the
control that Tk gives us over text display is not powerful enough
to handle such formatting so we have to work with the least common
denominator.
The top suggestions for a misspelling are saved in an array and
offered to the user when they right-click (or on the Mac ctrl-click)
a misspelled word. Selecting an entry from this menu will replace
the misspelling with the correction shown. Replacement is integrated
with the undo/redo stack so undoing a replacement will restore the
misspelled original text.
If Aspell could not be started during git-gui launch we silently eat
the error and run without spell checking support. This way users
who do not have Aspell in their $PATH can continue to use git-gui,
although they will not get the advanced spelling functionality.
If Aspell started successfully the version line and language are
shown in git-gui's about box, below the Tcl/Tk versions. This way
the user can verify the Aspell function has been activated.
If Aspell crashes while we are running we inform the user with an
error dialog and then disable Aspell entirely for the rest of this
git-gui session. This prevents us from fork-bombing the system
with Aspell instances that always crash when presented with the
current message text, should there be a bug in either Aspell or in
git-gui's output to it.
We escape all input lines with ^, as recommended by the Aspell manual
page, as this allows Aspell to properly ignore any input line that is
otherwise looking like a command (e.g. ! to enable terse output). By
using this escape however we need to correct all word offsets by -1 as
Aspell is apparently considering the ^ escape to be part of the line's
character count, but our Tk text widget obviously does not.
Available dictionaries are offered in the Options dialog, allowing
the user to select the language they want to spellcheck commit
messages with for the current repository, as well as the global
user setting that all repositories inherit.
Special thanks to Adam Flott for suggesting connecting git-gui
to Aspell for the purpose of spell checking the commit message,
and to Wincent Colaiuta for the idea to wait for a word boundary
before passing the message over for checking.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* lt/in-core-index:
lazy index hashing
Create pathname-based hash-table lookup into index
read-cache.c: introduce is_racy_timestamp() helper
read-cache.c: fix a couple more CE_REMOVE conversion
Also use unpack_trees() in do_diff_cache()
Make run_diff_index() use unpack_trees(), not read_tree()
Avoid running lstat(2) on the same cache entry.
index: be careful when handling long names
Make on-disk index representation separate from in-core one
[PATCH] gitk: properly deal with tag names containing / (slash)
When creating a tag through gitk, and the tag name includes a slash (or
slashes), gitk errors out in a popup window. This patch makes gitk use
'git tag' to create the tag instead of modifying files in refs/tags/,
which fixes the issue; if 'git tag' throws an error, gitk pops up with
the error message.
The problem was reported by Frédéric Brière through
http://bugs.debian.org/464104
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] gitk: Add checkbutton to ignore space changes
Ignoring space changes can be helpful. For example, a commit
claims to only reformat source code and you quickly want to
verify if this claim is true. Or a commit accidentally changes
code formatting and you want to focus on the real changes.
In such cases a button to toggle of whitespace changes would be
quite handy. You could quickly toggle between seeing and
ignoring whitespace changes.
This commit adds such a checkbutton right above the diff view.
However, in general it is a good thing to see whitespace changes
and therefore the state of the checkbutton is not saved. For
example, space changes might happen unintentionally. But they are
real changes yielding different sha1s for the blobs involved.
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
git-blame.el: show the when, who and what in the minibuffer.
Change the default operation to show 'when (day the commit was made),
who (who made the commit), what (what the commit log was)' in the
minibuffer instead of SHA1 and title of the commit log.
Since the user may prefer other displaying options, it is made as a
user-configurable option.
This establishes what the "bad" whitespaces are for this
project.
The rules are:
- Unless otherwise specified, indent with SP that could be
replaced with HT are not "bad". But SP before HT in the
indent is "bad", and trailing whitespaces are "bad".
- For C source files, initial indent by SP that can be replaced
with HT is also "bad".
- Test scripts in t/ and test vectors in its subdirectories can
contain anything, so we make it unrestricted for now.
Anything "bad" will be shown in WHITESPACE error indicator in
diff output, and "apply --whitespace=warn" will warn about it.
This is used to report misconfigured configuration file that does not
give any value to a non-boolean variable, e.g.
[section]
var
It is perfectly fine to say it if the section.var is a boolean (it means
true), but if a variable expects a string value it should be flagged as
a configuration error.
Work around curl-gnutls not liking to be reinitialized
curl versions 7.16.3 to 7.18.0 included had a regression in which https
requests following curl_global_cleanup/init sequence would fail with ASN1
parser errors with curl-gnutls. Such sequences happen in some cases such
as git fetch.
We work around this by removing the http_init and http_cleanup calls from
get_refs_via_curl, replacing them with a transport->data initialization
with the http_walker (which does http_init).
While the http_walker is not currently used in get_refs_via_curl, http
and walker code refactor will make it use it.
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski <jnareb@gmail.com> wrote Sun, Feb 03, 2008:
> Junio C Hamano wrote:
> > Jakub Narebski <jnareb@gmail.com> writes:
> >
> > [From] http://thread.gmane.org/gmane.comp.version-control.git/53457/focus=53458
> Julian Phillips:
> > Are you using docbook xsl 1.72? There are known problems building the
> > manpages with that version. 1.71 works, and 1.73 should work when it get
> > released.
I was able to solve this problem with this patch, which adds a XSL file
used specifically for DOCBOOK_XSL_172=YesPlease and where dots and
backslashes are escaped properly so they won't be substituted to the
wrong thing further down the "DocBook XSL pipeline". Doing the escaping
in the existing callout.xsl breaks v1.70.1. Hopefully v1.73 will end
this part of the manpage nightmare.
builtin-commit: remove .git/SQUASH_MSG upon successful commit
After doing a merge --squash, and commit afterwards, the commit message
template SQUASH_MSG in the git directory is not removed, which means that
the content of SQUASH_MSG is used as default commit message for all
subsequent commits. So have git commit remove the file SQUASH_MSG from
the git directory upon a successful commit.
The problem was discovered by Frédéric Brière, reported through
http://bugs.debian.org/464656
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git prune remove temporary packs that look like write failures
Write errors when repacking (eg, due to out-of-space conditions)
can leave temporary packs (and possibly other files beginning
with "tmp_") lying around which no existing
codepath removes and which aren't obvious to the casual user.
These can also be multi-megabyte files wasting noticeable space.
Unfortunately there's no way to definitely tell in builtin-prune
that a tmp_ file is not being used by a concurrent process,
such as a fetch. However, it is documented that pruning should
only be done on a quiet repository and --expire is honoured
(using code from Johannes Schindelin, along with a test case
he wrote) so that its safety is the same as that of loose
object pruning.
Since they might be signs of a problem (unlike orphaned loose
objects) the names of any removed files are printed.
Signed-off-by: David Tweed (david.tweed@gmail.com) Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that the default of branch.autosetupmerge is true
In 34a3e69 (git-branch: default to --track) the default was changed to
true, to help new git users. But yours truly forgot to update the
documentation. This fixes it.
Noticed by Kalle Olavi Niemitalo.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_beginning_of_line didn't take into account that the
previous line might have ended with \ in which case it shouldn't
stop but continue its search.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around curl-gnutls not liking to be reinitialized
curl versions 7.16.3 to 7.18.0 included had a regression in which https
requests following curl_global_cleanup/init sequence would fail with ASN1
parser errors with curl-gnutls. Such sequences happen in some cases such
as git fetch.
We work around this by removing the http_init and http_cleanup calls from
get_refs_via_curl, replacing them with a transport->data initialization
with the http_walker (which does http_init).
While the http_walker is not currently used in get_refs_via_curl, http
and walker code refactor will make it use it.
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" has the option --max-pack-size to limit the file
size of the packs to a certain amount of bytes. On platforms where
the pack file size is limited by filesystem constraints, it is easy
to forget this option, and this option does not exist for "git gc"
to begin with.
So introduce a config variable to set the default maximum, but make
this overrideable by the command line.
Suggested by Tor Arvid Lund.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ba227857(Reduce the number of connects when fetching), we checked
the return value of git_connect() to see if the connection was
successful.
However, for the git:// protocol, there is no need to have another
process, so the return value was NULL.
Now, it makes sense to assume the rule that git_connect() will return
NULL if it fails (at the moment, it die()s if it fails), so return
a dummy child process.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>