git-gui: Make sure we get errors from git-update-index
I'm seeing a lot of silent failures from git-update-index on
Windows and this is leaving the index.lock file intact, which
means users are later unable to perform additional operations.
When the index is locked behind our back and we are unable to
use it we may need to allow the user to delete the index lock
and try again. However our UI state is probably not currect
as we have assumed that some changes were applied but none of
them actually did. A rescan is the easiest (in code anyway)
solution to correct our UI to show what the index really has
(or doesn't have).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Git progress bars from tools like git-push and git-fetch use CR
to skip back to the start of the current line and redraw it with
an updated progress. We were doing this in our Tk widget but had
failed to skip the CR, which Tk doesn't draw well.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Post Git 1.5.3 a new style progress bar has been introduced that
uses only one line rather than two. The formatting of the completed
and total section is also slightly different so we must adjust our
regexp to match. Unfortunately both styles are in active use by
different versions of Git so we need to look for both.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Correctly report failures from git-write-tree
If git-write-tree fails (such as if the index file is currently
locked and it wants to write to it) we were not getting the error
message as $tree_id was always the empty string so we shortcut
through the catch and never got the output from stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-config won't honor any options after --list. We must supply
the --global option in front of --list if we really want to load
the global configuration options.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Honor a config.mak in git-gui's top level
I keep forgetting to include TCLTK_PATH when I build git-gui on some
systems. Placing that rule (among others) into a config.mak makes it
easier to compile the application the same way every time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Collapse $env(HOME) to ~/ in recent repositories on Windows
Apparently native Tcl/Tk on Windows is using \ as the return value
from [file separator] but [file normalize] on that same system is
using / rather than \ to represent a directory separator. I really
think that is nuts, but its what is happening.
So we can actually just hardcode our separator to / as all systems
we support (Windows, Mac OS X, UNIX) use /.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user tries to clone a Git repository that is actually a
workdir of another repository (by way of contrib git-new-workdir)
then the contents of .git is a series of Windows .lnk files which
Tcl can't read if this is a native Tcl process. To read the real
objects directory we need to resolve the link to that location.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Use proper Windows shortcuts instead of bat files
On Windows its better to use a shortcut (.lnk file) over a batch
script (.bat) as we can specify the icon file for the .lnk and
thus have these git specific objects appear on the desktop with
that git specific icon file.
Unfortunately the authors of Tcl did not bless us with the APIs
needed to create shortcuts from within Tcl. But Microsoft did
give us Windows Scripting Host which allows us to execute some
JavaScript that calls some sort of COM object that can operate
on a .lnk file.
We now build both Cygwin and non-Cygwin "desktop icons" as proper
Windows .lnk files, using the "Start in" property of these files
to indicate the working directory of the repository the user wants
to launch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Ensure copyright message is correctly read as UTF-8
On Windows using the native Tcl/Tk the copyright header is
being read from the script using the system encoding, which
may not be utf-8. This causes the multi-byte copyright symbol
(which is actually encoded as utf-8) to read as two characters
and not as a proper copyright symbol. Explicitly asking Tcl
to read this sequence of bytes as utf-8 corrects the issue.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Bind n/c/o accelerators in repository chooser
On Windows we need to actually setup binds for the accelerator
keys, otherwise the OS doesn't respond to them when the user
presses the key combinations. Apparently we automatically get
these on Mac OS X when we configure the menu commands, but not
on Windows.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Fix bind errors when switching repository chooser panels
We need to remove any variable traces we may have installed
when the panel is destroyed as the trace may attempt to use
a widget that no longer exists on this panel.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Offer repository management features in menu bar
When we show the repository chooser as the primary toplevel (".") we
now offer the major choices not just on the window as hyperlinks but
they also now are shown in the Repository menu, including the recent
repository list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Change repository browser radio buttons to hyperlinks
Making a user click twice to select which action they want to perform
when starting git-gui is just wasting their time. Clicking once on a
radio button and then clicking again on the "Next >" button is quite
unnecessary.
Since the recent repository list is shown as a list of hyperlinks we
now offer the 3 basic startup actions as hyperlinks. Clicking on a
link will immediately jump to the next UI panel, saving the user time
as they don't need to click an additional button.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: offer a list of recent repositories on startup
If git-gui is started outside a work tree the repository chooser
will offer a list of recently opened repositories. Clicking on
any list entry directly opens the repository.
The list of recently opened repositories is stored in the config
as the multi-valued option gui.recentrepo. If the list grows beyond
10 entries it will be truncated by removing one of the older entries.
Only repositories that are opened through the repository chooser
will get added to the recent list. Repositories opened from the
shell will not yet be added to the recent list, as users are likely
to have a way to easily return to the same directory via their shell.
[sp: This is actually a combined work from both Steffen and myself.
Most of the ideas are Steffen's, as is the basic outline of
the code, but any outstanding bugs are entirely my fault.]
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Support LFs embedded in config file values
Using the new --null option added to git-config in git 1.5.3 we
can safely accept LFs that are embedded in configuration options.
This does require a completely different configuration file parser
then the pre 1.5.3 version as we are splitting on very different
values.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The parsing for the output of `git config --list` is the same for
both the global options and the current repository's options so we
can really just use the same parser between them.
I'm currently just refactoring the parser so we can use a different
one depending on the version of git available to us at runtime. My
next change will add support for 1.5.3's --null option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To better handle configuration options that contain LFs in their
values we want to use the new -z option available in git-config
version 1.5.3 and later. To configure load_config based upon the
git version we need to move thos below the git-version computation.
No logic changes yet, just a minor reordering of the code.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Change main window layout to support wider screens
The layout is changed to have the file lists at the left (Unstaged
Changes at the top, Staged Changes below it) and the diff window
at the right (with the commit area below it).
An Italian glossary was also added. Some changes:
* commit (verb): (creare una) nuova revisione
* commit (noun): revisione
* checkout: attivazione
* tracking branch: duplicato locale di ramo remoto
* repository: archivio
* some terms are used with more consistency
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The wrapper adds the directory it is installed in to PATH.
This is required for the git commands implemented in shell.
git-gui fails to launch them if PATH is not modified.
The wrapper script also accepts an optional command line
switch '--working-dir <dir>' and changes to <dir> before
launching the actual git-gui. This is required to implement
the "Git Gui Here" Explorer shell extension.
As a last step the original git-gui script is launched,
which is expected to be located in the same directory
under the name git-gui.tcl.
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: add directory git-gui is located in to PATH (on Windows)
This commit modifies PATH to include a good guess where git
could be found. The first location to search for executable is
the directory git-gui is installed in. This is a good guess for
a sane installation.
Even if git is not available in PATH, git-gui is now able
to find it. Hence git-gui can be passed to wish as an absolute
path without caring about the environment.
We must modify PATH to be able to spawn shell based git commands.
For builtins it would be sufficient to located them and execute
them with their absolute path. But for shell based git commmands
PATH needs to be modified.
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* cs/de:
git-gui: Update German translation, including latest glossary changes
git-gui: Incorporate glossary changes into existing German translation
git-gui: Update German glossary according to mailing list discussion
git-gui: Add more words to translation glossary
git-gui: Shorten the staged/unstaged changes title bar text
The titles for the staged and unstaged areas were usually opening
up too narrow by default, causing the text to be clipped by Tcl as
it tried to center the text in the middle of the available area.
This meant that users who were new to git-gui did not get to see
the entire header and may be unclear about what the different lists
are.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A Mac OS X UI convention is to have Cmd-, be the accelerator key
for the preferences window, which by convention is located in the
apple menu under a separator below the about command. We also now
call this "Preferences..." as that is the conventional term used
in English.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Consolidate the Fetch and Push menus into a Remote menu
Sometimes the Fetch menu looks really odd, such as if you are in a
repository that has no remotes configured when you start git-gui.
Here we didn't have any items to add to the Fetch menu so it was a
tad confusing for the end-user to see an empty menu on the menu bar.
We now place all of the commands related to fetching and pushing of
changes into a single "Remote" menu. This way we have a better class
of bucket that we can drop additional remote related items into such
as doing a remote merge or editing the remote configuration specs.
The shortcuts to execute fetch/remote prune/push on existing remote
specifications are now actually submenus listing the remotes by name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Use progress meter in the status bar during index updates
If we are updating the index to stage or unstage changes or reverting
files in the working directory we can use the progress handling parts
of our status bar to perform this display work, reducing the amount of
code duplication we have in the index handling module.
Unfortunately the status bar is still a strict approximation as it is
unable to know when git-update-index has processed the data we fed to
it. The progress bar is actually a progress of the pipe buffer filling
up in the OS, not of the actual work done. Still, it tells the user we
are working and that has some value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most applications tend to have some sort of pretty image in the
about dialog, because it spruces the screen up a little bit and
makes the user happy about reading the information shown there.
We already have a logo in the repository selection wizard so we
can easily reuse this in the about dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Refactor about dialog code into its own module
The about dialog is getting somewhat long in size and will probably
only get more complex as I try to improve upon its display. As the
options dialog is even more complex than the about dialog we move
the about dialog into its own module to reduce the complexity of the
option dialog module.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Refactor Henrik Nyh's logo into its own procedure
By moving the logo into its own procedure we can use it in
multiple locations within the UI, but still load it only if
the logo is going to be used by the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
This commit teaches git-gui to accept versions with annotations
that start with text and optionally end with a dot followed by
a number.
This is needed by the current versioning scheme of msysgit,
which uses versions like 1.5.3.mingw.1. However, the changes
is not limited to this use case. Any version of the form
<numeric version>.<anytext>.<number> would be parsed and only
the starting <numeric version> used for validation.
[sp: Minor edit to remove unnecessary group matching]
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some workflows allow the user to forcefully update a remote branch,
such as in a "proposed updates" (aka "pu") branch where the branch
is rewound and rebuilt on a daily basis against the current master
branch. In such a case the "--force" or leading + must be used to
make git-push execute anyway, even though it may be discarding one
or more commits on the remote side.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't crash when starting gitk from a browser session
If the user has started git-gui from the command line as a browser
we offer the gitk menu options but we didn't create the main status
bar widget in the "." toplevel. Trying to access it while starting
gitk just results in Tcl errors.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
gitk expects $env(GIT_DIR) to be valid as both a path that core Git
and Tcl/Tk can resolve to a valid directory, but it has no special
handling for Cygwin style UNIX paths and Windows style paths. So
we need to do that for gitk and ensure that only relative paths are
fed to it, thus allowing both Cygwin style and UNIX style paths to
be resolved.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Refer to ourselves as "Git Gui" and not "git-gui"
When displaying the name of the application in window titles
and menu options (e.g. "About [appname]") we would prefer to
call ourselves "Git Gui" over "git-gui" as the former name is
now being actively used in the Mac OS X UI strings and just
plain looks better to the reader.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Support a native Mac OS X application bundle
If we are building on Darwin (sometimes known as Mac OS X) and we
find the Mac OS X Tk.framework in the expected location we build
a proper Mac OS X application bundle with icons and info list. The
git-gui and git-citool commands are modified to be very short shell
scripts that just execute the application bundle, starting Tk with
our own info list and icon set.
Although the Makefile change here is rather large it makes for a
much more pleasant user experience on Mac OS X as git-gui now has
its own icon on the dock, in the standard tk_messageBox dialogs,
and the application name now says "Git Gui" instead of "Wish" in
locations such as the menu bar and the alt-tab window.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Use Henrik Nyh's git logo icon on Windows systems
Rather than displaying the stock red "Tk" icon in our window
title bars and on the task bar we now show a Git specific logo.
This is Henrik Nyh's logo that we also use in the startup wizard,
scaled to a 16x16 image for Windows task bar usage with a proper
transparent background.
Signed-off-by: Shawn O. Pearce <shawn.o.pearce@bankofamerica.com>
git-gui: Make the status bar easier to read in the setup wizard
The setup wizard looks better if we layout the progress bar as
two lines: the first line holds the message text and our text
formatting of the progress while the second line holds the bar
itself. Both extend the full width of the window and we try to
pad out the message text so the window doesn't expand when the
completed progress number jumps to the next order of magnitude.
This change required updating the progress meter format string
to allow the application to supply the precision. So we also
are updating all of the translations at once to use the newer
formatting string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The msysGit port uses his logo within some of their components,
and frankly it looks better here in git-gui for our repository
setup wizard screen. The logo fits quite nicely along the left
edge of our window, leaving significantly more vertical space
for things like the git-fetch console output.
Because the logo changes the layout charateristics of the setup
window I also needed to adjust some of the padding for our widgets
and stop using a fixed width window size. We now let Tk compute
the correct size of the main window whenever the layout changes,
and drop the window into roughly the upper left 1/3 of the desktop
so its not quite centered but is likely to be far enough away from
any sort of task bars/menu bars/docks that the user may have along
any edge of the screen.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't delete scrollbars in console windows
If we have added a scrollbar to the console window because one
direction has too much text to fit in the available screen space
we should just keep the scrollbars. Its annoying to watch our
horizontal scrollbar bounce in and out of the window as additional
text is inserted into the widget and the need for the scrollbar
comes and goes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't delete console window namespaces too early
If the console finishes displaying its output and is "done" but
needs to draw a scrollbar to show the final output messages it
is possible for Tk to delete the window namespace before it does
the text widget updates, which means we are unable to add the
horizontal or vertical scrollbar to the window when the text
widget decides it cannot draw all glyphs on screen.
We need to delay deleting the window namespace until we know
the window is not going to ever be used again. This occurs if
we are done receiving output, the command is successful and the
window is closed, or if the window is open and the user chooses
to close the window after the command has completed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The program "msgfmt" was our only dependency on gettext. Since it
is more than just a hassle to compile gettext on MinGW, here is a
(very simple) drop-in replacement, which Works For Us.
[sp: Changed Makefile to enable/disable po2msg.sh by the new
NO_MSGFMT variable.]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Copy objects/info/alternates during standard clone
If the source repository is using an objects/info/alternates file
we need to copy the file to our new repository so that it can access
any objects that won't be copied/hardlinked as they are stored in the
alternate location.
We explicitly resolve all paths in the objects/info/alternates as
relative to the source repository but then convert them into an
absolute path for the new clone. This allows the new clone to
access the exact same locaton as the source repository, even if
relative paths had been used before.
Under Cygwin we assume that Git is Cygwin based and that the paths
in objects/info/alternates must be valid Cygwin UNIX paths, so we
need to run `cygpath --unix` on each line in the alternate list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Keep the UI responsive while counting objects in clone
If we are doing a "standard" clone by way of hardlinking the
objects (or copying them if hardlinks are not available) the
UI can freeze up for a good few seconds while Tcl scans all
of the object directories. This is espeically noticed on a
Windows system when you are working off network shares and
need to wait for both the NT overheads and the network.
We now show a progress bar as we count the objects and build
our list of things to copy. This keeps the user amused and
also makes sure we run the Tk event loop often enough that
the window can still be dragged around the desktop.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't bother showing OS error message about hardlinks
If we failed to create our test hardlink for the first object
we need to link/copy then the only recourse we have is to make
a copy of the objects. Users don't really need to know the OS
details about why the hardlink failed as its usually because
they are crossing filesystem boundaries.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Avoid console scrollbars unless they are necessary
We shouldn't create scrollbars for the horziontal or vertical sides
unless there is enough content to make it worth drawing these widgets
on screen. This way users don't loose screen space to objects that
won't help them navigate the display.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Allow users to choose/create/clone a repository
If we are started outside of a git repository than it is likely
the user started us from some sort of desktop shortcut icon in
the operating system. In such a case the user is expecting us to
prompt them to locate the git repository they want to work on,
or to help them make a new repository, or to clone one from an
existing location. This is a very simple wizard that offers the
user one of these three choices.
When we clone a repository we always use the name `master` in the
local repository, even if the remote side does not appear to point
to that name. I chose this as a policy decision. Much of the Git
documentation talks about `master` being the default branch in a
repository and that's what git-init does too. If the remote side
doesn't call its default branch `master` most users just don't care,
they just want to use Git the way the documentation describes.
Rather than relying on the git-clone Porcelain that ships with
git we build the new repository ourselves and then obtain content
by git-fetch. This technique simplifies the entire clone process
to roughly: `git init && git fetch && git pull`. Today we use
three passes with git-fetch; the first pass gets us the bulk of
the objects and the branches, the second pass gets us the tags,
and the final pass gets us the current value of HEAD to initialize
the default branch.
If the source repository is on the local disk we try to use a
hardlink to connect the objects into the new clone as this can
be many times faster than copying the objects or packing them and
passing the data through a pipe to index-pack. Unlike git-clone
we stick to pure Tcl [file link -hard] operation thus avoiding the
need to fork a cpio process to setup the hardlinks. If hardlinks
do not appear to be supported (e.g. filesystem doesn't allow them or
we are crossing filesystem boundaries) we use file copying instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm starting to setup a main window that the user can use to
locate an existing repository, clone an existing repository,
or create a new repository from scratch. To help do that I
want most of our common UI support already defined before we
start to look for the Git repository, this way if it was not
found we can open a window to help the user locate it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
If we are using Cygwin and the git repository is actually a
workdir (by way of git-new-workdir) but this Tcl process is
a native Tcl/Tk and not the Cygwin Tcl/Tk then we are unable
to traverse the .git/info path as it is a Cygwin symlink and
not a standard Windows directory.
So we actually need to start a Cygwin process that can do the
path translation for us and let it test for .git/info/exclude
so we know if we can include that file in our git-ls-files or
not.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Handle starting on mapped shares under Cygwin
I really cannot explain Cygwin's behavior here but if we start
git-gui through Cygwin on a local drive it appears that Cygwin
is leaving $env(PATH) in Unix style, even if it started a native
(non-Cygwin) Tcl/Tk process to run git-gui. Yet starting that
same git-gui and Tcl/Tk combination through Cygwin on a network
share causes it to automatically convert $env(PATH) into Windows
style, which broke our internal "which" implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Display message box when we cannot find git in $PATH
If we cannot find the git executable in the user's $PATH then
we cannot function correctly. Because we need that to get the
version so we can load our library correctly we cannot rely on
the library function "error_popup" here, as this is all running
before the library path has been configured, so error_popup is
not available to us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Cygwin has been stuck on the 8.4.1 version of Tcl/Tk for quite some
time, even though the main Tcl/Tk distribution is already shipping
an 8.4.15. The problem is Tcl/Tk no longer supports Cygwin so
apparently building the package for Cygwin is now a non-trivial task.
Its actually quite easy to build the native Win32 version of Tcl/Tk
by compiling with the -mno-cygwin flag passed to GCC but this means
we lose all of the "fancy" Cygwin path translations that the Tcl
library was doing for us. This is particularly an issue when we
are trying to start git-gui through the git wrapper as the git
wrapper is passing off a Cygwin path for $0 and Tcl cannot find
the startup script or the library directory.
We now use `cygpath -m -a` to convert the UNIX style paths to Windows
style paths in our startup script if we are building on Cygwin.
Doing so allows either the Cygwin-ized Tcl/Tk 8.4.1 that comes with
Cygwin or a manually built 8.4.15 that is running the pure Win32
implementation to read our script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Disable native platform text selection in "lists"
Sometimes we use a Tk text widget as though it were a listbox.
This happens typically when we want to show an icon to the left
of the text label or just when a text widget is generally a better
choice then the native listbox widget.
In these cases if we want the user to have control over the selection
we implement our own "in_sel" tag that shows the selected region
and we perform our own selection management in the background
via keybindings and mouse bindings. In such uses we don't want
the user to be able to activate the native platform selection by
dragging their mouse through the text widget. Doing so creates a
very confusing display and the user is left wondering what it may
mean to have two different types of selection in the same widget.
Tk doesn't allow us to delete the "sel" tag that it uses internally
to manage the native selection but it will allow us to make it
invisible by setting the tag to have the same display properties
as unselected text. So long as we don't actually use the "sel"
tag for anything in code its effectively invisible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tcl expression "[append [mc Foo] Bar]" does not return the string
"FooBar" after translation; instead it is setting the variable Foo to
the value Bar, or if Foo is already defined it is appending Bar onto
the end of it. This is *not* what we wanted to have happen here.
Tcl's join function is actually the correct function but its default
joinStr argument is a single space. Unfortunately all of our call
sites do not want an extra space added to their string. So we need
a small wrapper function to make the call to join with an empty
join string. In C this is (roughly) the job of the strcat function.
Since strcat is not yet used at the global level it is a reasonable
name to use here.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Make the tree browser also use lightgray selection
In 9adccb05 Matthijs Melchior changed our selection colors in the
main index/working directory file lists to use a lightgray as the
background color as this made the UI easier to read on all platforms.
When we did that change we missed doing also doing in the file
browser UI. Doing so just makes the entire thing UI consistent.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
git-gui: Paper bag fix "Commit->Revert" format arguments
The recent bug fix to correctly handle filenames with %s (or any
other valid Tcl format specifier) missed a \ on this line and
caused the remaining format arguments to not be supplied when we
updated the status bar. This caused a Tcl error anytime the user
was trying to perform a file revert.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Provide 'uninstall' Makefile target to undo an installation
Several users have requested a "make uninstall" target be provided
in the stock git-gui Makefile so that they can undo an install
if git-gui goes to the wrong place during the initial install,
or if they are unhappy with the tool and want to remove it from
their system.
We currently assume that the complete set of files we need to delete
are those defined by our Makefile and current source directory.
This could differ from what the user actually has installed if they
installed one version then attempt to use another to perform the
uninstall. Right now I'm just going to say that is "pilot error".
Users should uninstall git-gui using the same version of source
that they used to make the installation. Perhaps in the future we
could read tclIndex and base our uninstall decisions on its contents.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Font chooser to handle a large number of font families
Simon Sasburg noticed that on X11 if there are more fonts than can
fit in the height of the screen Tk's native tk_optionMenu does not
offer scroll arrows to the user and it is not possible to review
all choices or to select those that are off-screen. On Mac OS X
the tk_optionMenu works properly but is awkward to navigate if the
list is long.
This is a rewrite of our font selection by providing a new modal
dialog that the user can launch from the git-gui Options panel.
The dialog offers the user a scrolling list of fonts in a pane.
An example text shows the user what the font looks like at the size
they have selected. But I have to admit the example pane is less
than ideal. For example in the case of our diff font we really
should show the user an example diff complete with our native diff
syntax coloring.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Acked-by: Simon Sasburg <simon.sasburg@gmail.com>
git-gui: Make backporting changes from i18n version easier
This is a very trivial hack to define a global mc procedure that
does not actually perform i18n translations on its input strings.
By declaring an mc procedure here in our maint version of git-gui
we can take patches that are intended for the latest development
version of git-gui and easily backport them without needing to
tweak the mc calls first.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Translators working on po files will likely need to know what the
@@noun and @@verb parts are in the original message text, and why
these are different messages in the po files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Commit is used as both verb and noun. While these happen to be
the same in some languages, they are not the same in all
languages, so disambiguate them using context-sensitive i18n.
Signed-off-by: Harri Ilari Tapio Liusvaara <hliusvaa@cc.hut.fi> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ocassionally, one would want to translate the same string used in
different contexts in diffrent ways. This patch provides a wrapper
for msgcat::mc that trims "@@" and anything coming after it, whether
or not the string actually got translated.
Proposed-by: Harri Ilari Tapio Liusvaara <hliusvaa@cc.hut.fi> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't delete send on Windows as it doesn't exist
The Windows port of Tk does not have the send command so we
cannot delete it from our global namespace, but the Mac OS
X and X11 ports do have it. Switching this delete attempt
into a catch makes send go away, or stay away.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Localize commit/author dates when displaying them
Currently the Git plumbing is not localized so it does not know how
to output weekday and month names that conform to the user's locale
preferences. This doesn't fit with the rest of git-gui's UI as some
of our dates are formatted in Tcl and some are just read from the Git
plumbing so dates aren't consistently presented.
Since git-for-each-ref is presenting us formatted dates and it offers
no way to change that setting even in git 1.5.3.1 we need to first do
a parse of the text strings it produces, correct for timezones, then
reformat the timestamp using Tcl's formatting routines.
Not exactly what I wanted to do but it gets us consistently presented
date strings in areas like the blame viewer and the revision picker
mega-widget's tooltips.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Mark revision chooser tooltip for translation
Someone on #git today pointed out that the revision chooser's tooltips
are were being drawn with untranslated strings for the fixed labels we
include, such as "updated", "commit" and "remote". These strings are
now passed through mc to allow them to be localized.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Trim trailing slashes from untracked submodule names
Oddly enough `git ls-files --others` supplies us the name of an
untracked submodule by including the trailing slash but that
same git version will not accept the name with a trailing slash
through `git update-index --stdin`. Stripping off that final
slash character before loading it into our file lists allows
git-gui to stage changes to submodules just like any other file.
This change should give git-gui users some basic submodule support,
but it is strictly at the plumbing level as we do not actually know
about calling the git-submodule porcelain that is a recent addition
to git 1.5.3.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Assume untracked directories are Git submodules
If `git ls-files --others` returned us the name of a directory then
it is because Git has decided that this directory itself contains a
valid Git repository and its files shouldn't be listed as untracked
for this repository.
In such a case we should label the object as a Git repository and
not just as a directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
Dmitry V. Levin pointed out that on GNU linux libdir is often used
in Makefiles to mean "/usr/lib" or "/usr/lib64", a directory that
is meant to hold platform-specific binary files. Using a different
libdir meaning here in git-gui's Makefile breaks idomatic expressions
like rpm specifile "make libdir=%_libdir".
Originally I asked that the git.git Makefile undefine libdir before
it calls git-gui's own Makefile but it turns out this is very hard
to do, if not impossible. Renaming our libdir to gg_libdir resolves
this case with a minimum amount of fuss on our part.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tk designers blessed us with the "send" command, which on X11
will allow anyone who can connect to your X server to evaluate any
Tcl code they desire within any running Tk process. This is just
plain nuts. If git-gui wants someone running Tcl code within it
then would ask someone to supply that Tcl code to it; waiting for
someone to drop any random Tcl code into us is not fantastic idea.
By renaming send to the empty name the procedure will be removed
from the global namespace and Tk will stop responding to random Tcl
evaluation requests sent through the X server. Since there is no
facility to filter these requests it is unlikely that we will ever
consider enabling this command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>