We used to depend on bignum from openssl for rev-list to compute
merge-order, but there is no reason to use different build
recipe from other programs anymore. Just build it with git-%$X
rule like everybody else.
* js/remoteconfig:
Revert "fetch, pull: ask config for remote information"
fetch, pull: ask config for remote information
builtin-push: also ask config for remote information
builtin-push: make it official.
Fix builtin-push to honor Push: lines in remotes file.
builtin-push: resurrect parsing of Push: lines
git builtin "push"
Somebody on the #git channel complained that the sha1_to_hex() thing uses
a static buffer which caused an error message to show the same hex output
twice instead of showing two different ones.
That's pretty easily rectified by making it uses a simple LRU of a few
buffers, which also allows some other users (that were aware of the buffer
re-use) to be written in a more straightforward manner.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
core.prefersymlinkrefs: use symlinks for .git/HEAD
When inspecting a project whose build infrastructure used to
assume that .git/HEAD is a symlink ref, core.prefersymlinkrefs
in the config file of such a project would help to bisect its
history.
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Allow view to specify arbitrary arguments to git-rev-list
gitk: Fix file list display when files are renamed
gitk: Basic support for highlighting one view within another
gitk: Add a tree-browsing mode
gitk: Use a text widget for the file list
gitk: add menu item for editing the current view
gitk: Implement "permanent" views (stored in ~/.gitk)
gitk: Use git-rev-parse only to identify file/dir names on cmd line
gitk: Remember the view in the history list
gitk: Don't reread git-rev-list output from scratch on view switch
gitk: Fix various bugs in the view support
gitk: Make File->Update work properly again
gitk: Implement multiple views
[PATCH] gitk: Add a visual tag for remote refs
gitk: Allow view to specify arbitrary arguments to git-rev-list
The list of arguments to git-rev-list, including arguments that
select the range of commits, is now a part of the view specification.
If any arguments are given to gitk, they become part of the
"Command line" view, and the non-file arguments become the default
for any new views created.
Getting an error from git-rev-list is no longer fatal; instead the
error window pops up, and when you press OK, the main window just
shows "No commits selected".
The git-rev-list arguments are entered in an entry widget in the
view editor window using shell quoting conventions, not Tcl quoting
conventions.
* fix:
git-send-email: fix version string to be valid perl
Give the user a hint for how to continue in the case that git-am fails because it requires user intervention
gitk: Fix file list display when files are renamed
The conversion of the file list to use a text widget assumed incorrectly
that the list of files from git-diff-tree -r would correspond 1-1 with
the diff sections in the output of git-diff-tree -r -p -C, which is
not true when renames are detected. This fixes it by keeping the
elements in the difffilestart list in the order they appear in the
file list window.
Since this means that the elements of difffilestart are no longer
necessarily in ascending order, it's somewhat hard to do the dynamic
highlighting in the file list as the diff window is scrolled, so I
have taken that out for now.
gitk: Basic support for highlighting one view within another
With this, one view can be used as a highlight for another, so that
the commits that are in the highlight view are displayed in bold.
This required some fairly major changes to how the list of ids,
parents, children, and id to row mapping were stored for each view.
We can now be reading in several views at once; for all except the
current view, we just update the displayorder and the lists of parents
and children for the view.
This also creates a little bit of infrastructure for handling the
watch cursor.
Extended SHA1 -- "rev^@" syntax to mean "all parents"
A short-hand "rev^@" is understood to be "all parents of the
named commit" with this patch. So you can do
git show v1.0.0^@
to view the parents of a merge commit,
gitk ^v1.0.0^@ v1.0.4
to view the log between two revs (including the bottom one), and
git diff --cc v1.1.0 v1.0.0^@
to inspect what got changed from the merge parents of v1.0.0 to v1.1.0.
This might be just my shiny new toy that is not very useful in
practice. I needed it to do the multi-tree diff on Len's
infamous 12-way Octopus; typing "diff --cc funmerge funmerge^1
funmerge^2 funmerge^3 ..." was too painful.
[jc: taking suggestions from Linus and Johannes to match expectations
from shell users who are used to see $@ or $* either of which makes
sense. I tend to write "$@" more often so...]
You can now select whether you want to see the patch for a commit
or the whole tree. If you select the tree, gitk will now display
the commit message plus the contents of one file in the bottom-left
pane, when you click on the name of the file in the bottom-right pane.
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
"git diff(n)" without --base, --ours, etc. defaults to --cc,
which usually is the same as -p unless you are in the middle of
a conflicted merge, just like the shell script version.
"git diff(n) blobA blobB path" complains and dies.
"git diff(n) tree0 tree1 tree2...treeN" does combined diff that
shows a merge of tree1..treeN to result in tree0.
Giving "-c" option to any command that defaults to "--cc" turns
off dense-combined flag.
* fix:
Fix trivial typo in git-log man page.
Properly render asciidoc "callouts" in git man pages.
Fix up remaining man pages that use asciidoc "callouts".
Update the git-branch man page to include the "-r" option,
annotate: display usage information if no filename was given
annotate: fix warning about uninitialized scalar
git-am --resolved: more usable error message.
Properly render asciidoc "callouts" in git man pages.
Adds an xsl fragment to render docbook callouts when
converting to man page format. Update the Makefile
to have "xmlto" use it when generating man pages.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Fix up remaining man pages that use asciidoc "callouts".
Unfortunately docbook does not allow a callout to be
referenced from inside a callout list description.
Rewrite one paragraph in git-reset man page to work
around this limitation.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
After doing the hard work of hand resolving the conflicts in the
working tree, if the user forgets to run update-index to mark
the paths that have been resolved, the command gave an
unfriendly "fatal: git-write-tree: not able to write tree" error
message. Catch the situation early and give more meaningful
message and suggestion.
- number of loose objects
- disk occupied by loose objects
- number of objects in local packs
- number of loose objects that are also in pack
- unrecognised garbage in .git/objects/??/.
We used to omit delta base candidates that is much bigger than
the target, but delta size does not grow when we delete more, so
that was not a very good heuristics.
When I split out the builtin commands into their own files, I left the
include of <sys/ioctl.h> in git.c rather than moving it to the file that
needed it (builtin-help.c).
Nobody seems to have noticed, because everything still worked, but because
the TIOCGWINSZ macro was now no longer defined when compiling the
"term_columns()" function, it would no longer automatically notice the
terminal size unless your system used the ancient "COLUMNS" environment
variable approach.
Trivially fixed by just moving the header include to the file that
actually needs it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us do things like highlighting all the entries for which
the corresponding part of the diff is at least partly visible in the
commit/patch display window, and in future it will let us display
the file list in a hierarchical form rather than as a flat file list.
git-fetch: resolve remote symrefs for HTTP transport
git-fetch validates that a remote ref resolves to a SHA1 prior to calling
git-http-fetch. This adds support for resolving a few levels of symrefs
to get to the SHA1.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git rebase [--onto <newbase>] <upstream> [<branch>]
git rebase --continue
git rebase --abort
Add "--continue" to restart the rebase process after
manually resolving conflicts. The user is warned if
there are still differences between the index and the
working files.
Add "--abort" to restore the original branch, and
remove the .dotest working files.
Some minor additions to the git-rebase documentation.
[jc: fix that applies to the maintenance track has been dealt
with separately.]
* fix:
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
There is no point reading the whole object just to make sure it exists and
it is of the expected type. We added sha1_object_info() for such need
after this code was written, so use it.
When we are in a subdirectory of a git archive, we need to take the prefix
of that subdirectory into accoung when we verify filename arguments.
Noted by Matthias Lederhofer
This also uses the improved error reporting for all the other git commands
that use the revision parsing interfaces, not just git-rev-parse. Also, it
makes the error reporting for mixed filenames and argument flags clearer
(you cannot put flags after the start of the pathname list).
[jc: with fix to a trivial typo noticed by Timo Hirvonen]
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
commit-tree: allow generic object name for the tree as well.
We use get_sha1() for -p (parent) objects, but still used
get_sha1_hex() for the tree. Just to be consistent, allow
extended SHA1 expression for the tree object name.
Note that this is not to encourage funky things like this:
When we updated ls-tree recursive output to omit the tree nodes, 246cc52f388cae8ca99e5a12b8458c9bfa467765 adjusted the old test
so that we do not expect to see trees in its output. Later,
with 0f8f45cb4a7e664b396f73c25891da46b953b8b8, we added back the
ability to show both with -t option, but we forgot to update the
test as well.
The patch format shows complete rewrite as deletion of all old lines
followed by addition of all new lines. Count lines consistenly with
that when doing diffstat.
Makefile: remove and create libgit.a from scratch.
Foolishly I renamed diff.o around which caused an old diff.o
taken out of libgit.a and got linked into resulting binary and
exhibited mysterious breakage for many people. This borrows
from the kernel Makefile (scripts/Makefile.build) to first remove
the target and then recreate.
This patch partly changes the background color for remote refs.
It makes it easy to quickly distinguish remote refs from local
developer branches.
I ignore remote HEADs, as these really should be drawn as
aliases to other heads. But there is no simple way to
detect that HEADs really are aliases for other refs via
"git-ls-remote".
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
gitk: Implement "permanent" views (stored in ~/.gitk)
With this the user can now mark a view as "permanent" and it will
appear in the list every time gitk is started (until it is deleted).
Also tidied up the view definition window, and changed the view
menu to use radiobuttons for the view selections so there is some
feedback as to which is the current view.
The set_reuse_addr() error case was the only error case in
socklist() where we returned rather than continued. Not sure
why. Either we must free the socklist, or continue. This patch
continues on error.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 0032d548db56eac9ea09b4ba05843365f6325b85 commit)
Deprecate usage of git-var -l for getting config vars list
This has been an unfortunate sideway in the git API evolution.
We use git-repo-config for all the other .git/config interaction
so let's also use git-repo-config -l for the variable listing.
This adds git-repo-config --list (or git-repo-config -l) support,
similar to what git-var -l does now (to be phased out so that we
have a single sane interface to the config file instead of fragmented
and confused API).
This patch adds a Documentation/config.txt file included by git-repo-config
and currently aggregating hopefully all the available git plumbing / core
porcelain configuration variables, as well as briefly describing the format.
It also updates an outdated bit of the example in git-repo-config(1).
rev-parse: better error message for ambiguous arguments
Currently, if git-rev-parse encounters an argument that is neither a
recognizable revision name nor the name of an existing file or
directory, and it hasn't encountered a "--" argument, it prints an
error message saying "No such file or directory". This can be
confusing for users, including users of programs such as gitk that
use git-rev-parse, who may then think that they can't ask about the
history of files that no longer exist.
This makes it print a better error message, one that points out the
ambiguity and tells the user what to do to fix it.