* 'jn/web' (early part):
gitweb: Add "next" link to commit view
gitweb: Add title attribute to ref marker with full ref name
gitweb: Do not show difftree for merges in "commit" view
gitweb: SHA-1 in commit log message links to "object" view
gitweb: Hyperlink target of symbolic link in "tree" view (if possible)
gitweb: Add generic git_object subroutine to display object of any type
gitweb: Show target of symbolic link in "tree" view
gitweb: Don't use Content-Encoding: header in git_snapshot
git-fetch: Avoid reading packed refs over and over again
When checking which tags to fetch, the old code used to call
git-show-ref --verify for each remote tag. Since reading even
packed refs is not a cheap operation when there are a lot of
local refs, the code became quite slow.
This fixes it by teaching git-show-ref to filter out existing
refs using a new mode of operation of git-show-ref.
Default GIT_COMMITTER_NAME to login name in recieve-pack.
If GIT_COMMITTER_NAME is not available in receive-pack but reflogs
are enabled we would normally die out with an error message asking
the user to correct their environment settings.
Now that reflogs are enabled by default in (what we guessed to be)
non-bare Git repositories this may cause problems for some users
who don't have their full name in the gecos field and who don't
have access to the remote system to correct the problem.
So rather than die()'ing out in receive-pack when we try to log a
ref change and have no committer name we default to the username,
as obtained from the host's password database.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
When replacing an existing file A with a directory A that has a
file A/B in it in the index, 'update-index --replace --add A/B'
did not properly remove the file to make room for the new
directory.
There was a trivial logic error, most likely a cut & paste one,
dating back to quite early days of git.
When replacing an existing file A with a directory A that has a
file A/B in it in the index, 'git add' did not succeed because
it forgot to pass the allow-replace flag to add_cache_entry().
It might be safer to leave this as an error and require the user
to explicitly remove the existing A first before adding A/B
since it is an unusual case, but doing that automatically is
much easier to use.
update-index: make D/F conflict error a bit more verbose.
When you remove a directory D that has a tracked file D/F out of the
way to create a file D and try to "git update-index --add D", it used
to say "cannot add" which was not very helpful. This issues an extra
error message to explain the situation before the final "fatal" message.
Since D/F conflicts are relatively rare event, extra verbosity would
not make things too noisy.
Add a kind of "next" view in the bottom part of navigation bar for
"commit" view, similar to what was added for "commitdiff" view in
commit 151602df00b8e5c5b4a8193f59a94b85f9b5aebc
'gitweb: Add "next" link to commitdiff view'
For "commit" view for single parent commit:
(parent: _commit_)
For "commit" view for merge (multi-parent) commit:
(merge: _commit_ _commit_ ...)
For "commit" view for root (parentless) commit
(initial)
where _link_ denotes hyperlink. SHA1 of commit is shortened
to 7 characters on display.
While at it, remove leftovers from commit cae1862a by Petr Baudis:
'gitweb: More per-view navigation bar links'
namely the "blame" link if there exist $file_name and commit has a
parent; it was added in git_commit probably by mistake. The rest
of what mentioned commit added for git_commit was removed in
commit 6e0e92fda893311ff5af91836e5007bf6bbd4a21 by Luben Tuikov:
'gitweb: Do not print "log" and "shortlog" redundantly in commit view'
(which should have probably removed also this "blame" link removed now).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Add title attribute to ref marker with full ref name
Add title attribute, which will be shown as popup on mouseover in
graphical web browsers, with full name of ref, including part (type)
removed from the name of ref itself. This is useful to see that this
strange ref is StGIT ref, or it is remote branch, or it is lightweigh
tag (with branch-like name).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Do not show difftree for merges in "commit" view
Do not show difftree against first parent for merges (commits with
more than one parent) in "commit" view, because it usually is
misleading. git-show and git-whatchanged doesn't show diff for merges
either.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Align section headers of 'git status' to new 'git add'.
Now that 'git add' is considered a first-class UI for 'update-index'
and that the 'git add' documentation states "Even modified files
must be added to the set of changes about to be committed" we should
make the output of 'git status' align with that documentation and
common usage.
So now we see a status output such as:
# Added but not yet committed:
# (will commit)
#
# new file: x
#
# Changed but not added:
# (use "git add file1 file2" to include for commit)
#
# modified: x
#
# Untracked files:
# (use "git add" on files to include for commit)
#
# y
which just reads better in the context of using 'git add' to
manipulate a commit (and not a checkin, whatever the heck that is).
We also now support 'color.status.added' as an alias for the existing
'color.status.updated', as this alias more closely aligns with the
current output and documentation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Suggest use of "git add file1 file2" when there is nothing to commit.
If a user modifies files and runs 'git commit' (without the very
useful -a option) and they have not yet updated the index they
are probably coming from another SCM-like tool which would perform
the same as 'git commit -a' in this case. Showing the user their
current status and a final line of "nothing to commit" is not very
reassuring, as the user might believe that Git did not recognize
their files were modified.
Instead we can suggest as part of the 'nothing to commit' message
that the user invoke 'git add' to add files to their next commit.
Suggested by Andy Parkins' Git 'niggles' list
(<200612132237.10051.andyparkins@gmail.com>).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-diff documentation use [--] when it should.
Two of the cases has "[--] [<path>...]" and two had "-- [<path>...]".
Not terribly consistent and potentially confusing. Also add "[--]" to
the synopsis so that it's obvious you can use it from the very
beginning.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
For multivars, the "git-repo-config name value ^$" is useful but
nonintuitive and troublesome to do repeatedly (since the value is not
at the end of the command line). This commit simply adds an --add
option that adds a new value to a multivar. Particularly useful for
tracking a new branch on a remote:
Now that 'git show' accepts ref:path as an argument to specify a
tree or blob we should use the same completion logic as we support
for cat-file's object identifier.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Enable reflogs by default in any repository with a working directory.
New and experienced Git users alike are finding out too late that
they forgot to enable reflogs in the current repository, and cannot
use the information stored within it to recover from an incorrectly
entered command such as `git reset --hard HEAD^^^` when they really
meant HEAD^^ (aka HEAD~2).
So enable reflogs by default in all future versions of Git, unless
the user specifically disables it with:
[core]
logAllRefUpdates = false
in their .git/config or ~/.gitconfig.
We only enable reflogs in repositories that have a working directory
associated with them, as shared/bare repositories do not have
an easy means to prune away old log entries, or may fail logging
entirely if the user's gecos information is not valid during a push.
This heuristic was suggested on the mailing list by Junio.
Documentation was also updated to indicate the new default behavior.
We probably should start to teach usuing the reflog to recover
from mistakes in some of the tutorial material, as new users are
likely to make a few along the way and will feel better knowing
they can recover from them quickly and easily, without fsck-objects'
lost+found features.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Provide more meaningful output from 'git init-db'.
Back in the old days of Git when people messed around with their
GIT_DIR environment variable more often it was nice to know whether
or not git-init-db created a .git directory or used GIT_DIR.
As most users at that time were rather technical UNIXy folk the
message "defaulting to local storage area" made sense to some and
seemed reasonable.
But it doesn't really convey any meaning to the new Git user,
as they don't know what a 'local storage area is' nor do they
know enough about Git to care. It also really doesn't tell the
experienced Git user a whole lot about the command they just ran,
especially if they might be reinitializing an existing repository
(e.g. to update hooks).
So now we print out what we did ("Initialized empty" or
"Reinitialized existing"), what type of repository ("" or "shared"),
and what location the repository will be in ("$GIT_DIR").
Suggested in part by Andy Parkins in his Git 'niggles' list
(<200612132237.10051.andyparkins@gmail.com>).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
make commit message a little more consistent and conforting
It is nicer to let the user know when a commit succeeded all the time,
not only the first time. Also the commit sha1 is much more useful than
the tree sha1 in this case.
This patch also introduces a -q switch to supress this message as well
as the summary of created/deleted files.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid accessing a slow working copy during diffcore operations.
The Cygwin folks have done a fine job at creating a POSIX layer
on Windows That Just Works(tm). However it comes with a penalty;
accessing files in the working tree by way of stat/open/mmap can
be slower for diffcore than inflating the data from a blob which
is stored in a packfile.
This performance problem is especially an issue in merge-recursive
when dealing with nearly 7000 added files, as we are loading
each file's content from the working directory to perform rename
detection. I have literally seen (and sadly watched) paint dry in
less time than it takes for merge-recursive to finish such a merge.
On the other hand this very same merge runs very fast on Solaris.
If Git is compiled with NO_FAST_WORKING_DIRECTORY set then we will
avoid looking at the working directory when the blob in question
is available within a packfile and the caller doesn't need the data
unpacked into a temporary file.
We don't use loose objects as they have the same open/mmap/close
costs as the working directory file access, but have the additional
CPU overhead of needing to inflate the content before use. So it
is still faster to use the working tree file over the loose object.
If the caller needs the file data unpacked into a temporary file
its likely because they are going to call an external diff program,
passing the file as a parameter. In this case reusing the working
tree file will be faster as we don't need to inflate the data and
write it out to a temporary file.
The NO_FAST_WORKING_DIRECTORY feature is enabled by default on
Cygwin, as that is the platform which currently appears to benefit
the most from this option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes it is asked on the list how to revert selected path in
the index from a tree, most often HEAD, without affecting the
files in the working tree. A similar operation that also
affects the working tree files has been available in the form of
"git checkout <tree> -- <paths>...".
By definition --soft would never affect either the index nor the
working tree files, and --hard is the way to make the working
tree files as close to pristine, so this new option is available
only for the default --mixed case.
Bypass expensive content comparsion during rename detection.
When comparing file contents during the second loop through a rename
detection attempt we can skip the expensive byte-by-byte comparsion
if both source and destination files have valid SHA1 values. This
improves performance by avoiding either an expensive open/mmap to
read the working tree copy, or an expensive inflate of a blob object.
Unfortunately we still have to at least initialize the sizes of the
source and destination files even if the SHA1 values don't match.
Failing to initialize the sizes causes a number of test cases to fail
and start reporting different copy/rename behavior than was expected.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Porcelain documentation should talk in terms of end-user workflow, not
in terms of implementation details. Do not suggest update-index, but
git-add instead. Explain differences among 0-, 1- and 2-tree cases
not as differences of number of trees given to the command, but say
why user would want to give these number of trees to the command in
what situation.
* jc/read-tree-ignore:
read-tree: document --exclude-per-directory
Loosen "working file will be lost" check in Porcelain-ish
read-tree: further loosen "working file will be lost" check.
* np/addcommit:
git-commit: allow --only to lose what was staged earlier.
Documentation/git-commit: rewrite to make it more end-user friendly.
make 'git add' a first class user friendly interface to the index
* lh/branch-rename:
git-branch: let caller specify logmsg
rename_ref: use lstat(2) when testing for symlink
git-branch: add options and tests for branch renaming
Showing local and remote branches in green and red was simply
overkill, as all we wanted was to make it easy to tell them
apart (local ones can be built on top by committing, but the
remote tracking ones can't).
Use plain coloring for local branches and paint remotes in red.
* js/merge:
merge-recursive: add/add really is modify/modify with an empty base
Get rid of the dependency on RCS' merge program
merge-file: support -p and -q; fix compile warnings
Add builtin merge-file, a minimal replacement for RCS merge
xdl_merge(): fix and simplify conflict handling
xdl_merge(): fix thinko
xdl_merge(): fix an off-by-one bug
merge-recursive: use xdl_merge().
xmerge: make return value from xdl_merge() more usable.
xdiff: add xdl_merge()
"git push $URL HEAD~6" created a bogus ref HEAD~6 immediately
under $GIT_DIR of the remote repository. While we should keep
refspecs that have arbitrary extended SHA-1 expression on the
source side working (e.g. "HEAD~6:refs/tags/yesterday"), we
should not create bogus ref on the other end.
The documentation talked about "git push $URL tag <tag>" as a short-hand
for refs/tags/<tag>:refs/tags/<tag> for a long time but that was never
the case (the short-hand was for "git fetch"). Instead of fixing the
documentation, just add a bit of code to match it since it is easy to do
and would make it more consistent.
This is just a random hack to work around problems people seem
to be seeing in manpage backend of xmlto (it appears we are
getting ".sp" at the end of line without line break).
99.9999% of the time, the command is used with a single
strategy; after a merge failure, saying "No strategy handled the
merge" is technically correct, but there is no point stressing
we tried and failed all the possibilities the user has given.
Prior to 65ac6e9c3f47807cb603af07a6a9e1a43bc119ae we deleted a file
from the working directory during a merge if the file existed before
the merge started but was renamed by the branch being merged in.
This broke in 65ac6e as git-merge-recursive did not actually update
the working directory on an uncontested rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Although --cached and --index are confusing wording, the use of
word --cached for git-diff is consistent with git-apply. It means
"work with index without looking at the working tree".
We should probably come up with better wording for --cached, if
somebody wants to deprecate it. But making --index and --cached
synonyms for diff while leaving them mean different things for
apply is no good.
Some versions of the SVN libraries cause die() to exit with 255,
and 40cf043389ef4cdf3e56e7c4268d6f302e387fa0 tightened up
test_expect_failure to reject return values >128.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow subcommand.color and color.subcommand color configuration
While adding colour to the branch command it was pointed out that a
config option like "branch.color" conflicts with the pre-existing
"branch.something" namespace used for specifying default merge urls and
branches. The suggested solution was to flip the order of the
components to "color.branch", which I did for colourising branch.
This patch does the same thing for
- git-log (color.diff)
- git-status (color.status)
- git-diff (color.diff)
- pager (color.pager)
I haven't removed the old config options; but they should probably be
deprecated and eventually removed to prevent future namespace
collisions. I've done this deprecation by changing the documentation
for the config file to match the new names; and adding the "color.XXX"
options to contrib/completion/git-completion.bash.
Unfortunately git-svn reads "diff.color" and "pager.color"; which I
don't like to change unilaterally.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (42 commits)
git-svn: correctly handle packed-refs in refs/remotes/
add test case for recursive merge
git-svn: correctly display fatal() error messages
git-svn: allow dcommit to take an alternate head
git-svn: enable logging of information not supported by git
Clarify fetch error for missing objects.
Move Fink and Ports check to after config file
shortlog: fix segfault on empty authorname
shortlog: remove "[PATCH]" prefix from shortlog output
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
Documentation: simpler shared repository creation
shortlog: fix segfault on empty authorname
Add branch.*.merge warning and documentation update
Fix perl/ build.
git-svn: use do_switch for --follow-parent if the SVN library supports it
Fix documentation copy&paste typo
git-svn: extra error check to ensure we open a file correctly
Documentation: update git-clone man page with new behavior
...
Previously dcommit would unconditionally commit all patches
up-to and including the current HEAD. Now if an optional
command-line argument is specified, it will only commit
up to the specified revision.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: enable logging of information not supported by git
The changes are now tracked in
$GIT_DIR/svn/$GIT_SVN_ID/untracked.log
Information in the untracked.log include:
* the addition and removal of empty directories
(changes of these will also warn the user)
* file and directory property changes, including (but not
limited to) svk:merge and svn:externals
* revision properties (revprops) are also tracked
* users will be warned of 'absent' file and directories
(if users are forbidden access)
Fields in entries are separated by spaces; "unsafe" characters
are URI-encoded so that each entry takes exactly one line.
There is currently no automated parser for dealing with the data
in untracked.log, but it should be possible to write one to
create empty directories on checkout and manage
externals/subprojects.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
I wanted to have a visual indication of which branches are local and
which are remote in git-branch -a output; however Junio was concerned
that someone might be using the output in a script. This patch
addresses the problem by colouring the git-branch output - which in
"auto" mode won't be activated.
I've based it off the colouring code for builtin-diff.c; which means
there is a branch color configuration variable that needs setting to
something before the color will appear.
The colour parameter is "color.branch" rather than "branch.color" to
avoid clashing with the default namespace for default branch merge
definitions.
This patch chooses green for local, red for remote and bold green for
current.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: SHA-1 in commit log message links to "object" view
Instead of checking if explicit SHA-1 in commit log message is sha1 of
commit and making link to "commit" view, make [fragment of] explicit
SHA-1 in commit log message link to "object" view. While at it allow
to hyperlink also shortened SHA-1, from 8 characters up to full SHA-1,
instead of requiring full 40 characters of SHA-1.
This makes the following changes:
* SHA-1 of objects which no longer exists, for example in commit
cherry-picked from no longer existing temporary branch, or revert
of commit in rebased branch, are no longer marked as such by not
being made into hyperlink (and not having default hyperlink view:
being underlined among others). On the other hand it makes gitweb
to not write error messages when object is not found to web serwer
log; it also moves cost of getting type and SHA-1 validation to
when link is clicked, and not only viewed.
* SHA-1 of other objects: blobs, trees, tags are also hyperlinked
and lead to appropriate view (although in the case of tags it is
more natural to just use tag name).
* You can put shortened SHA-1 of commit in the commit message, and it
would be hyperlinked; it would be checked on clicking if abbrev is
unique.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Hyperlink target of symbolic link in "tree" view (if possible)
Make symbolic link target in "tree" view into hyperlink to generic
"object" view (as we don't know if the link target is file (blob) or
directory (tree), and if it exist at all).
Target of link is made into hyperlink when:
* hash_base is provided (otherwise we cannot find hash
of link target)
* link is relative
* in no place link goes out of root tree (top dir)
Full path of symlink target from the root dir is provided in the title
attribute of hyperlink.
Currently symbolic link name uses ordinary file style (hidden
hyperlink), while the hyperlink to symlink target uses default
hyperlink style, so it is underlined while link target which is not
made into hyperlink is not underlined.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Add generic git_object subroutine to display object of any type
Add generic "object" view implemented in git_object subroutine, which is
used to display object of any type; to be more exact it redirects to the
view of correct type: "blob", "tree", "commit" or "tag". To identify object
you have to provide either hash (identifier of an object), or (in the case of
tree and blob objects) hash of commit object (hash_base) and path (file_name).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Don't use Content-Encoding: header in git_snapshot
Do not use Content-Encoding: HTTP header in git_snapshot, using
instead type according to the snapshot type (compression type).
Some of web browser take Content-Encoding: to be _transparent_
also for downloading, and store decompressed file (with incorrect
compression suffix) on download.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Make cvsexportcommit work with filenames with spaces and non-ascii characters.
This patch uses git-apply to do the patching which simplifies the code a lot
and also uses one pass to git-diff. git-apply gives information on added,
removed files as well as which files are binary.
Removed the test for checking for matching binary files when deleting them
since git-apply happily deletes the file. This is matter of taste since we
allow some fuzz for text patches also.
Error handling was cleaned up, but not much tested.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The old code looked backwards from the email address to parse
the name, allowing an arbitrary number of spaces between the
two. However, in the case of no name, we looked back too far to
the 'author' (or 'Author:') header.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Jeff King originally fixed it by looking back only one
character; Johannes Schindelin pointed out that we could try
harder while at it to cope with commits with broken headers.
shortlog: remove "[PATCH]" prefix from shortlog output
Originally noticed by Nicolas Pitre; the real cause was the code
was prepared to deal with [PATCH] (and [PATCH n/m whatever])
prefixes but forgot that the string can be indented while acting
as a filter.
* maint:
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
Make sure the empty tree exists when needed in merge-recursive.
There are some baseless merge cases where git-merge-recursive will
try to compare one of the branches against the empty tree. However
most projects won't have the empty tree object in their object database
as Git does not normally create empty tree objects. If the empty tree
object is missing then the merge process will die, as it cannot load the
object from the database. The error message may make the user think that
their database is corrupt when its actually not.
So instead we should just create the empty tree object whenever it is
needed. If the object already exists as a loose object then no harm
done. Otherwise that loose object will be pruned away later by either
git-prune or git-prune-packed.
Thanks goes to Junio for suggesting this fix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
The reason for this was because an inexperienced user might
mistakenly think what is shown with the last-minute diff
contains all the change that is being committed (instead, what
the user asked to check was an incremental diff since what has
been staged so far). However, this turns out to only annoy
people who know what they are doing. Inexperienced people
would not be using the first "update-index" anyway, in which
case they would see the full changes in the "git diff".
rerere: record (or avoid misrecording) resolved, skipped or aborted rebase/am
Data in rr-cache isn't valid after a patch application is
skipped or and aborted, so our next commit could be misrecorded
as a resolution of that skipped/failed commit, which is wrong.
git-am --skip, git-rebase --skip/--abort will automatically
invoke git-rerere clear to avoid this.
Also, since git-am --resolved indicates a resolution was
succesful, remember to run git-rerere to record the resolution
(and not surprise the user when the next commit is made).
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Take Johannes Schindelin's suggestions for a further simplification of
the shared repository creation using git --bare init-db --shared, and
for a simplified cvsimport using an existing CVS working directory.
Also insert more man page references.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cvs-migration.txt | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-) Signed-off-by: Junio C Hamano <junkio@cox.net>
The old code looked backwards from the email address to parse the name,
allowing an arbitrary number of spaces between the two. However, in the case
of no name, we looked back too far to the 'author' (or 'Author:') header.
Instead, remove at most one space between name and address.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add branch.*.merge warning and documentation update
This patch clarifies the meaning of the branch.*.merge option.
Previously, if branch.*.merge was specified but did not match any
ref, the message "No changes." was not really helpful regarding
the misconfiguration. This patch adds a warning for this.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit f848718a broke the build in perl/ directory by
allowing the Makefile.PL to overwrite the now-tracked Makefile.
Fix this by forcing Makefile.PL to produce its output in
perl.mak as the broken commit originally intended.
git-svn: use do_switch for --follow-parent if the SVN library supports it
do_switch works with the SVN Perl bindings after r22312 in the
Subversion trunk. Since no released version of SVN currently
supports it; we'll just autodetect it and enable its usage
when a user has a recent-enough version of SVN.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>