Commit f2e0873 (branch: report invalid tracking branch as gone) removed
an early return from fill_tracking_info() in the path taken when 'git
branch -v' lists a branch in sync with its upstream. This resulted in an
unconditionally added space in front of the subject line:
This reverts commit 5e7dcad771cb873e278a0571b46910d7c32e2f6c; there
may be unbounded number of symbolic refs in the repository, but the
capability header line in the on-wire protocol has a rather low
length limit.
Merge branch 'ap/remote-hg-unquote-cquote' into maint
A fast-import stream expresses a pathname with funny characters by
quoting them in C style; remote-hg remote helper (in contrib/)
forgot to unquote such a path.
* ap/remote-hg-unquote-cquote:
remote-hg: unquote C-style paths when exporting
Merge branch 'jc/upload-pack-send-symref' into maint
One long-standing flaw in the pack transfer protocol used by "git
clone" was that there was no way to tell the other end which branch
"HEAD" points at, and the receiving end needed to guess. A new
capability has been defined in the pack protocol to convey this
information so that cloning from a repository with more than one
branches pointing at the same commit where the HEAD is at now
reliably sets the initial branch in the resulting repository.
* jc/upload-pack-send-symref:
t5570: Update for clone-progress-to-stderr branch
t5570: Update for symref capability
clone: test the new HEAD detection logic
connect: annotate refs with their symref information in get_remote_head()
connect.c: make parse_feature_value() static
upload-pack: send non-HEAD symbolic refs
upload-pack: send symbolic ref information as capability
upload-pack.c: do not pass confusing cb_data to mark_our_ref()
t5505: fix "set-head --auto with ambiguous HEAD" test
We did not handle cases where http transport gets redirected during
the authorization request (e.g. from http:// to https://).
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
Merge branch 'mm/checkout-auto-track-fix' into maint
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
* bw/solaris-sed-tr-test-portability:
t4015: simplify sed command that is not even seen by sed
Avoid difference in tr semantics between System V and BSD
Change sed i\ usage to something Solaris' sed can handle
* js/tests-windows-port-fix:
tests: undo special treatment of CRLF for Windows
Windows: a test_cmp that is agnostic to random LF <> CRLF conversions
t5300-pack-object: do not compare binary data using test_cmp
The second illustration that shows the history after "git pull"
spelled the remote-tracking branch with "remotes/" prefix, which
is not necessary. Drop it.
To match the assumption that a remote-tracking branch is used to
keep track of the advancement of the master at the origin, update
the first illustration that shows the history before "git pull"
to show the distinction between the master currently at origin and
the stale origin/master remote-tracking branch.
Noticed-by: Felipe Contreras <felipe.contreras@gmail.com> Helped-by: Max Horn <max@quendi.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The printf utility provided by coreutils when interpreting '\%o' format
does not recognize %o as formatting directive. For example
printf '\%o 0 returns \%o and warning: ignoring excess arguments,
starting with ‘0’, which results in failed tests in
t5309-pack-delta-cycles.sh. In most shells the test ends with success as
the printf is a builtin utility.
Fix it by using '\\%o' which is interpreted consistently in all versions
of printf.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdg-open is a tool similar to git-web--browse. It opens a file or URL in the
user's preferred application. It could probably be made default at least on
Linux with a graphical environment.
Signed-off-by: Rüdiger Sonderfeld <ruediger@c-plusplus.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3200: do not open a HTML manual page when DEFAULT_MAN_FORMAT is html
We have the build configuration option DEFAULT_MAN_FORMAT to choose a
format different from man pages to be used by 'git help' when no format
is requested explicitly. Since 65db0443 (Set the default help format to
html for msys builds, 2013-06-04) we use html on Windows by default.
There is one test in t3200-branch.sh that invokes a help page. The
intent of the redirections applied to the command invocation is to avoid
that the man page viewer interferes with the automated test. But when
the default format is not "man", this does not have the intended effect,
and the HTML manual page is opened during the test run. Request "man"
format explicitly to keep the test silent.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/valgrind-test-fix:
Revert "test-lib: allow prefixing a custom string before "ok N" etc."
Revert "test-lib: support running tests under valgrind in parallel"
The codepath that send_pack() calls pack_objects() mistakenly
closed the same file descriptor twice, leading to potentially
closing a wrong file descriptor that was opened in the meantime.
* jl/pack-transfer-avoid-double-close:
Clear fd after closing to avoid double-close error
All callers to parse_pathspec() must choose between getting no
pathspec or one path that is limited to the current directory
when there is no paths given on the command line, but there were
two callers that violated this rule, triggering a BUG().
* nd/magic-pathspec:
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
* fc/styles:
block-sha1/sha1.c: have SP around arithmetic operators
base85.c: have SP around arithmetic operators
archive.c: have SP around arithmetic operators
alloc.c: have SP around arithmetic operators
abspath.c: have SP around arithmetic operators
alias: have SP around arithmetic operators
C: have space around && and || operators
One long-standing flaw in the pack transfer protocol used by "git
clone" was that there was no way to tell the other end which branch
"HEAD" points at, and the receiving end needed to guess. A new
capability has been defined in the pack protocol to convey this
information so that cloning from a repository with more than one
branches pointing at the same commit where the HEAD is at now
reliably sets the initial branch in the resulting repository.
* jc/upload-pack-send-symref:
t5570: Update for clone-progress-to-stderr branch
t5570: Update for symref capability
clone: test the new HEAD detection logic
connect: annotate refs with their symref information in get_remote_head()
connect.c: make parse_feature_value() static
upload-pack: send non-HEAD symbolic refs
upload-pack: send symbolic ref information as capability
upload-pack.c: do not pass confusing cb_data to mark_our_ref()
t5505: fix "set-head --auto with ambiguous HEAD" test
Handle the case where http transport gets redirected during the
authorization request better.
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
The Makefile currently builds the roff manpage, but not the
html form. As some people may prefer the latter, let's make
it an option to build that, too. We also wire it into "make
doc" so that it is built by default.
This patch does not build or install it as part of
"install-doc"; that would require extra infrastructure to
handle installing the html as we do in git's regular
Documentation/ tree. That can come later if somebody is
interested.
Tested-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone now reports its progress to standard error, which throws off
t5570. Using test_i18ngrep instead of test_cmp allows the test to be
more flexible by only looking for the expected error and ignoring any
other output from the program.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid difference in tr semantics between System V and BSD
Solaris' tr (both /usr/bin/ and /usr/xpg4/bin) uses the System V
semantics for tr whereby string1's length is truncated to the length
of string2 if string2 is shorter. The BSD semantics, as used by GNU tr
see string2 padded to the length of string1 using the final character
in string2. POSIX explicitly doesn't specify the correct behavior
here, making both equally valid.
This difference means that Solaris' native tr implementations produce
different results for tr ":\t\n" "\0" than GNU tr. This breaks a few
tests in t0008-ignores.sh.
Possible fixes for this are to make string2 be "\0\0\0" or "[\0*]".
Instead, use perl to perform these transliterations which means we
don't need to worry about the difference at all. Since we're replacing
tr with perl, we also use perl to replace the sed invocations used to
transform the files.
Replace four identical transforms with a function named
broken_c_unquote. Replace the other two identical transforms with a
fuction named broken_c_unquote_verbose.
Signed-off-by: Ben Walton <bdwalton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
this should involve little more work than looking at the ref
files (and packed-refs) themselves. However, for-each-ref
will actually load each object from disk just to print its
sha1. For most repositories, this isn't a big deal, but it
can be noticeable if you have a large number of refs to
print. Here are best-of-five timings for the command above
on a repo with ~10K refs:
[before]
real 0m0.112s
user 0m0.092s
sys 0m0.016s
[after]
real 0m0.014s
user 0m0.012s
sys 0m0.000s
This patch checks for %(objectname) and %(objectname:short)
before we actually parse the object (and the rest of the
code is smart enough to avoid parsing if we have filled all
of our placeholders).
Note that we can't simply move the objectname parsing code
into the early loop. If the "deref" form %(*objectname) is
used, then we do need to parse the object in order to peel
the tag. So instead of moving the code, we factor it out
into a separate function that can be called for both cases.
While we're at it, we add some basic tests for the
dereferenced placeholders, which were not tested at all
before. This helps ensure we didn't regress that case.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>